•
connect the power cord
•
refit the cover.
WARNING
When replacing the board, take great care not to damage the magnetic control
reed.
7.5 - STAINLESS STEEL FRONT PANEL REMOVAL
before removing the panel, we recommend that you take the drawer out of the fridge, as
described in the previous section.
To remove the drawer fronts, it is necessary to remove the screws from the perimeter area of
the drawer front itself (Fig. 7.5.1).
7.6 - DRIP TRAY REMOVAL ("DT" versions only)
To take out the drip tray, proceed as follows:
•
Disconnect the water waste pipe
•
Release the fastening pins inside the appliance.
•
Take out the drip tray using a downwards movement to release the fastening on the
bottom of the tray.
7.5.1
Fig.
O
A4
EN
71