Replacing The Door Panel; Replacing The Led Light Profile - Vitrifrigo VF51 Installation, Use And Maintenance Handbook

9.5 Replacing the door panel

1 Remove the door by following the indications shown in points 1, 2, 3 of
the previous paragraph.
2 Remove the door base profile by unscrewing the 2 screws fixing it to the
door.
3 Take off the supplied panel and replace it.
4 Re-position the door base profile.
5 Re-position the door on the refrigerator.

9.6 Replacing the LED light profile

IMPORTANT: Before replacing the light, make sure that the refrigerator is not
connected to any electrical supply. If connected, unplug the appliance from the
electrical supply. Replacing the LED light must be done by a suitably qualified
person who is able to adopt all the appropriate safety measures.
To replace the LED light profile:
1 Extract the safety cover perpendicular to the base, taking care not to
damage the fixing pins.
2 Disconnect the light's power cables.
3 Replace the LED light profile.
4 Connect the power source.
5 Replace the cover.
For Sales Information Please Contact RoadTrucker Inc (www.RoadTrucker.com)
8312 Sidbury Rd.; Wilmington, NC 28411 - (800) 507-0482 / (910) 686-4281