Control Panel Description And Use; On/Standby; Night Mode - Vitrifrigo SLIM 150 Installation Use And Assistance Manual

13.

Control Panel Description And Use

1 ON/STANDBY button
2 NIGHT MODE button
3 TURBO MODE button
4 Selector Lock (ventilation position) / Unlock (In use position)
5 Cooling level indicators
6 Cooling level buttons

On/Standby

To switch on the refrigerator, push the on/off switch shown in the figure for 1 second.
At this time all the functions are active.
The power source is selected automatically, with priority to the AC source.
To secure optimal performance, level your vehicle before operating the
refrigerator
For optimal performances, switch on the refrigerator at least 8 hours before
placing food
We advise to clean the inside of the refrigerator properly, before using the
refrigerator.

Night mode

To activate Night mode, hold down the corresponding button for one second.
The LED will light above the button and the led on the graduated scale will turn off.
During operation of this mode, it is not possible to change the cooling level.
After 10 hours of operation, Night mode will stop automatically.
The LED above the button turn off and the cooling level returns to the last set.
32
EN