Table of Contents
Advertisement
5
General Description
The FG10I DGT, FG10I DGT CHILL&CW refrigerator referred to in this manual is part of the FG
range of refrigerators, expressly designed to be coupled with coffee machines for the purpose of
guaranteeing the correct storage of milk or similar liquids for human consumption, which need to
be maintained at a controlled temperature.
The FG10I DGT CHILL&CW model also has a cup warmer module, for the hot maintaining of the
cups and/or glasses.
6
Description of Operation
The refrigerator operates using a refrigerant vapour compression cycle that transfers heat from the
inside to the outside, making it possible to keep the liquid for human consumption stored inside it
at a constant, pre-set temperature.
The refrigerant evaporates by removing the heat from the air via the cold inside walls of the
refrigerator (in contact with the evaporator through which it flows) before entering the compressor.
Here the pressure and temperature of the refrigerant are increased and it is then passed through
an air-cooled condenser, where it is condensed. Lastly, the refrigerant fluid returns inside the
evaporator via capillary and the cycle is repeated.
The internal temperature can be modified using the electronic thermostat.
7
Installation and Use
7.1
Checking the packaging
As soon as the package arrives, inspect it, making sure that it is not upturned and that it has
suffered no damage during transport. Remove the packaging and inspect the unit for damage of
any kind.
If there is any doubt as to the integrity of the system parts, do not use the refrigerator.
You must inform your dealer of any damage and/or anomalies not later than 24 hours from the
date of purchase.
20
EN
Advertisement
Table of Contents
