Table of Contents
Advertisement
LCD messages
The following messages are displayed on the LCD when the fax is performing a function or encounters an error.
Message
AUTO REDIAL
BUSY/NO SIGNAL
CARTRIDGE JAMMED
CHANGE CARTRIDGE
64
Cause
The fax is waiting to redial the receiving
number because the line was busy or the
receiving party did not answer when you
tried to send the document.
The telephone number you dialled is
busy.
The fax number dialled was incorrect.
The other party's fax machine is not
working.
The other party is not using a G3
machine.
The touch tone/rotary pulse setting on
your fax is incorrect.
The receiving fax machine did not answer
within 55 seconds (after all automatic
redialling attempts).
The cartridge holder cannot move. This is
normally due to a paper jam.
The BJ cartridge is empty.
Action
Wait for the fax to automatically redial
the number. If you want to cancel
automatic redialling, press [Stop] (see
p. 30).
Try sending the document at a later
time.
Check the fax number and dial again.
Contact the other party and have
them check their fax machine.
Contact the other party and ask them
to send or receive the document using
a G3 machine.
Set your fax to the setting that
matches your telephone line (see p.
12).
Contact the receiving party and have
them check their fax machine. You
can try to send the document using
manual sending (see p. 27). For long-
distance call, add pauses to the
registered number (see p. 30).
Clear the paper jam or whatever is
obstructing the cartridge holder and
then press [Stop] and start again. Do
not attempt to move the cartridge
holder manually.
Replace the BJ cartridge (see p. 58).
The fax will then print automatically
any documents received in memory.
Advertisement
Table of Contents
