Table of Contents
Advertisement
CODE
#080
The other party's fax does not support receiving a
document with a subaddress.
#081
The other party's fax does not support receiving a
document with an ITU-T password.
#082
The other party's fax does not support accepting a
polling request with a subaddress.
#083
You can not poll the other party to receive a
document because a subaddress and/or password does
not match.
#084
The other party can not receive a document with an
ITU-T password.
#102
You can not receive documents because a subaddress
and/or password does not match.
#995
Documents in the memory to be sent have been
cleared.
List of LCD Display Messages (Alphabetic
List)
Here is a list of messages that are displayed on the screen when a problem occurs
in the fax or the printer.
MESSAGE
#ALREADY IN USE
AUTO REDIAL
BUSY/NO SIGNAL
15-26
Maintenance & Frequently Asked Questions
PROBLEM
The box number you entered is already in use. For example, you can not use the
same box number for a confidential mailbox and a polling box. Try again with
another box number.
The other party's line was busy on the previous dialling attempt and your fax unit is
dialling the number again. To cancel redialling, press STOP when direct dialling or
press DELETE FILE, select transaction number then press SET when memory
sending.
The other party did not answer, even after redialling. Wait for a few minutes and try
again. When you send documents long distance, press PAUSE after dialling. If you
still can not send the document, the other party may have turned off their fax unit.
SOLUTION
Call the other party and confirm whether or not
their fax supports subaddress receiving. Try sending
again without a subaddress.
Call the other party and confirm whether or not
their fax supports ITU-T password receiving. Try
sending again without a password.
Call the other party and confirm whether or not
their fax can accept a polling request with a
subaddress. Try sending again without a subaddress.
Call the other party and confirm that the subaddress
and/or password that you are using are correct.
Call the other party and confirm whether or not the
other party's fax supports receiving a polling request
with an ITU-T password. Ask the other party to try
again without an ITU-T password.
Call the other party and confirm whether or not you
are using the correct subaddress and/or password.
The current transmission has been cleared. You may
start again, start a new operation, or leave the fax in
standby.
WHAT IT MEANS
Chapter 15
Advertisement
Table of Contents
