Integrated Peripherals; Pnp/Pci Configurations - Kontron MOPSlcdLX User Manual

KTD-S0005-0
21.6

Integrated Peripherals

Feature
Master/Slave Drive PIO
Mode
Master/Slave Drive UDMA
Bus Master Mode
HDD Block Mode
Keyboard Input Clock
Floppy Controller
Serial Port 1/2
Parallel Port
Parallel Port Mode
EPP Mode Select
21.7

PnP/PCI Configurations

Feature
Init Display First
Reset Configuration Data
Resources Controlled by
First PCI IRQ
Second PCI IRQ
Page 36
Option
Auto, Mode 0, Mode 1 Selects HDD PIO mode or Auto for optimum
transfer mode
Mode 2, Mode 3, Mode 4
Disabled
Disables UDMA or selects the optimum transfer
Auto
mode
Disabled Enables or disables IDE bus master mode
Enabled
Disabled Enables or disables IDE block mode. If the
harddrive supports block mode select Enabled
Enabled
for automatic detection of the optimal number
of block read/writes per sector
6 , 8, 12, 16 MHz Selects the keyboard clock
Disabled Enables or disables the floppy controller
Enabled
Disabled Selects I/O base and IRQ of serial port respec-
3F8/IRQ4 (Port 1) tively disables the port
2F8/IRQ3 (Port 2)
3E8/IRQ4
2E8/IRQ3
Disabled Selects I/O base and IRQ of serial port respec-
378/IRQ7 tively disables the port
278/IRQ5
3BC/IRQ7
Standard Standard = bidirectional
EPP = Enhanced Parallel Port specification
EPP
EPP1.9, EPP1.7 Selects the EPP specification
Option
Onboard Defines the search strategy for the primary
graphic controller
ISA Slot
PCI Slot
Disabled Enabled erases all configuration data in Exten-
ded System Configuration Data (ESCD)
Enabled
Auto (ESCD) Manual allows user configuration of PCI IRQs
Manual
IRQ3, IRQ4, IRQ5, IRQ7 The system BIOS must have two PCI IRQs. PCI
IRQ10 (First) interrupts own the highest priority and dis-
abling legacy (ISA) IRQs, also internal serial
IRQ11 (Second)
and parallel ports
IRQ12, IRQ15
MOPSlcdLX User's Guide
Setup Guide
Description
Description