7.17. Volume Control Pin Header (VOLUME_CONTROL)
The pin header VOLUME_CONTROL is intended to connect to volume control button of the monitor to control the
volume. This feature requires a software update to be enabled.
Figure 33: Volume Control Pin Header VOLUME_CONTROL
Table 39: Pin Assignment VOLUME_CONTROL
Pin
Signal
1
GPIO_VOL_DW
2
GND
3
GPIO_VOL_UP
7.18. I2C (Inter-Integrated Circuit) Pin Header (I2C)
The board reserves an I2C pin header for users to use the corresponding I2C channels for their own purpose within a
system.
Figure 34: I2C Pin Header I2C
Table 40: Pin Assignment I2C
Pin
Signal
1
I2C_SCL
2
I2C_SDA
3
GND
www.kontron.com
Description
Volume down button
Ground
Volume up button
Description
I2C serial clock
I2C serial data
Ground
MITX-CFL0 Series - User Guide, Rev. 1.1
Note
Note
// 64