Manual Reception (F3-6); Nav Data Format Selection (Cif/Nmea) - Furuno FS-1562 Manual

3.4 Manual Reception (F3-6)

Selects communication mode for reception.
1. Press Function key [F3] and then the [6] key.
2. Select receive mode: "AUTO". (Default)
AUTO
3. Press the [Enter] key. The reception mode: AUTO appears on the screen.
Note)
*AUTO mode
ARQ mode
FEC mode
DIRC mode

3.5 NAV data format selection (CIF/NMEA)

Jumper wire JP2 on the CONTROL board selects the format of the signal from the
navigator connected to the DP-5.
1. Call up the F6: Terminal menu screen that the format selected invalid.
Then press DP5 in this order to enable NMEA/CIF mode selection.
2. Press the down arrow key to display the NMEA/CIF mode selection screen.
3. To change the mode, move the cursor from "Look" to "Change" by pressing the right
arrow key. Place the cursor at the NMEA/CIF mode position with the down arrow
key, then select a format. Then press the [ENTER] key to return to the normal
display.
Manual Reception
ARQ FEC
: Automatic operation in ARQ and FEC.
: ARQ mode only.
:FEC mode only
: DIRC mode only
CONTROL board
ROMs
CIF :Short
NMEA :Open (Factory setting)
JP2
DIRC
D1-12
Receiving NAV data;
GLL, RMA, RMC,
VTG, DBT, MTW,
VHW, TRF
DP-5