Download  Print this page

Gamma; Alc Setting - Fujitsu Plasmavision P37FT05AUB User Manual

37 / 50 / 65 full hd display
Hide thumbs

Advertisement

• Jaggies Filter
This function alleviates the phenomenon where jagged
diagonal lines can be seen when interlace signals are input,
thus enabling a smoother motion picture display.
Each time
or
is pressed, the setting is switched.
Auto
Off
Press
to store.
• Motion Setting
The detecting sensitivity for motion picture is set.
The response of the picture processing is valued in the motion
picture priority setting.
Press : to specify still picture priority.
Press : to specify motion picture priority.
Press
to store.

Gamma

You can create your favorite image by fine tuning the
brightness.
• High Point
In a bright image scene, sets the point where the brightness is
to be adjusted.
Press
or
to set the point where the brightness is to be
adjusted.
Press
to store.
• High Point Gain
Fine tunes the brightness of the point set by High Point.
Press
to be darker.
Press
to be brighter.
Press
to store.
• Low Point
In a dark image scene, sets the point where the brightness is to
be adjusted.
Press
or
to set the point where the brightness is to be
adjusted.
Press
to store.
• Low Point Gain
Fine tunes the brightness of the point set by Low Point.
Press
to be darker.
Press
to be brighter.
Press
to store.

ALC Setting

• This function allows setting of the screen to your favorite
luminance matched to the ambient brightness.
• The ALC Setting function operates when the ambient sensor
is turned on. (See "Ambient Sensor" on P. E-26.)
• High Point Level
Sets the upper limit value of the ambient brightness detected by
the ambient sensor.
Press
to lower the upper limit value.
Press
to raise the upper limit value.
Press
to store.
• High Point Gain
Sets the upper limit value of the screen luminance correspon-
ding to the brightness detected by the ambient sensor in a
bright environment.
Press
to lower the upper limit value.
Press
to raise the upper limit value.
Press
to store.
• High Point Limit
Limits control of the screen luminance corresponding to the
ambient sensor when the value detected by the ambient sensor
exceeds the High Point Level and High Point Gain.
Each time
or
is pressed, the setting is switched.
[On]: Limit operates
[Off]: Limit does not operate
Press
to store.
• Low Point Level
Sets the lower limit value of the ambient brightness detected by
the ambient sensor.
Press
to lower the lower limit value.
Press
to raise the lower limit value.
Press
to store.
• Low Point Gain
Sets the lower limit value of the screen luminance correspon-
ding to the brightness detected by the ambient sensor in a dark
environment.
Press
to lower the lower limit value.
Press
to raise the lower limit value.
Press
to store.
• Low Point Limit
Limits control of the screen luminance corresponding to the
ambient sensor when the value detected by the ambient sensor
is lower than the Low Point Level and Low Point Gain.
Each time
or
is pressed, the setting is switched.
[On]: Limit operates
[Off]: Limit does not operate
Press
to store.
E-29

Advertisement

Table of Contents
loading

  Related Manuals for Fujitsu Plasmavision P37FT05AUB