Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Fujitsu P24-9 TE
Summary of Contents for Fujitsu P24-9 TE
- Page 1 Display Operating Manual FUJITSU Display P24-9 TE...
- Page 2 Internet at: "http://www.fujitsu.com/fts/" You can find driver updates at: "http://support.ts.fujitsu.com/download" Should you have any technical questions, please contact: • our Hotline/Service Desk ("http://support.ts.fujitsu.com/contact/servicedesk") • Your sales partner • Your sales office We hope you enjoy working with your new Fujitsu system!
- Page 4 Published by / Contact address in the EU Fujitsu Technology Solutions GmbH Mies-van-der-Rohe-Straße 8 80807 Munich, Germany "http://www.fujitsu.com/fts/" Copyright © Fujitsu Technology Solutions GmbH 2018. All rights reserved. Publication Date 04/2018 Order No.: A26361-K1646-Z320-1-7619, edition 1...
-
Page 5: Table Of Contents
FUJITSU Display P24-9 TE Operating Manual Your LCD screen... Important notes Getting started Operation Driver installation Notes on power management Notes on USB Power Delivery (USB-PD) Notes on low blue light mode Notes on ergonomic colour adjustment Explanatory information about... - Page 6 Trademarks Fujitsu and the Fujitsu logo are registered trademarks of Fujitsu Limited in Japan and other countries. Microsoft and Windows are trademarks or registered trademarks of the Microsoft Corporation in the United States and/or other countries.
- Page 7 Driver installation ..............38 Fujitsu...
- Page 8 USB-C port ................51 Fujitsu...
-
Page 9: Your Lcd Screen
You don’t need to be an "expert" to perform the operations described here. Nonetheless, it is important to always observe the safety notes given in the operating instructions for the computer and in this manual. In the event of any problems, please contact your sales office or our Service Desk. Fujitsu... -
Page 10: Further Information
"Safety information" • cross-references to an external source, e.g. a web address: For more information, go to "http://www.fujitsu.com/fts/" • Names of CDs, DVDs and titles or designations of other materials, e.g.: "CD/DVD Drivers & Utilities" or "Safety" Manual indicates a button on the monitor, e.g:... -
Page 11: Important Notes
Use a screen saver with moving images and activate the power management for • your monitor to prevent still images from "burning in". • If you operate the device with the swivel arm or a similar accessory, it must not be turned by 180°. Fujitsu... -
Page 12: Power Supply Unit
For devices which sit on the floor, only SJT type cable sets may be used. • The cable set must be selected according to the rated current for your device. • If necessary, replace the original power cable with a regular grounded 3-core mains lead. Fujitsu... -
Page 13: Transporting The Device
CE marking The shipped version of this device complies with the requirements of EU directives 2014/30/EC "Electromagnetic compatibility", 2014/35/EC "Low voltage directive", 2009/125/EC "Ecodesign directive" and 2011/65/EC "RoHS directive". Fujitsu... -
Page 14: Disposal And Recycling
E-mail: "info@recupel.be" acceptance locations "http://www.recupel.be" can be found at: "http://www.swico.ch" Asia Taiwan: Fujitsu America, Inc. Environmental Protection 1250E. Arques Avenue Administration Sunnyvale, CA 94085 U.S.A. Executive Yuan R.O.C. Phone No.: (408) 746-6000 "http://recycle.epa.gov.tw" You can also find more information on this at "http://www.fujitsu.com/fts/about/fts/environment-care/". -
Page 15: Getting Started
► Should you discover that the delivery does not correspond to the delivery note, notify your local sales outlet immediately. Do not discard the original packing material of the devices. You may need the packaging in the future if you need to transport your device. Fujitsu... -
Page 16: Setting Up The Device
To ensure sufficient ventilation, the air inlet and outlet openings of the device must be kept clear. Setting up an ergonomic video workstation ► Do not position the video workstation opposite a window (1). ► Position the monitor outside the reach of a light source (1). Fujitsu... - Page 17 Depending on the situation, it may be advisable to use a swivel arm or similar accessory (VESA FPMPMI), which are available from specialist dealers. For this purpose the monitor base must be removed beforehand as described in Chapter "Removing monitor base", Page Fujitsu...
-
Page 18: Mounting The Monitor Base
The inclination of the monitor can be adjusted by -3° (forwards) and +35° (backwards) from its vertical position. ► Hold the monitor with both hands on the left and right sides of the casing and move it to the desired angle. Fujitsu... -
Page 19: Adjusting The Rotation
For instructions on how to mount the swivel arm or a similar accessory, please see the documentation for the swivel arm or similar accessory. The assured ergonomics and safety of the monitor may be limited if the foot provided for the monitor is not used. Fujitsu... -
Page 20: Connecting The Device
4 = AUDIO OUT socket 10 = USB 3.0 (Downstream) 5 = HDMI socket 11 = USB-C (downstream) - max. 15W (5V/3A) 6 = Displayport IN socket 12 = USB 3.0 (Downstream) ► Select the appropriate data cable for your computer. Fujitsu... -
Page 21: Connecting Cables To The Computer
► Plug the power connector of the computer into a properly grounded mains outlet. If your computer has two monitor ports ("onboard" screen controller and separate graphics card), the monitor port for the separate graphics card is active as standard. Fujitsu... -
Page 22: Operation
Monitor and computer are switched on (ECO mode). orange Monitor is not receiving a video signal or is in power saving mode. does not light up Monitor is switched off. ► Switch the device on again with the ON/OFF switch (1). Fujitsu... -
Page 23: Notes On The Ambient Light Sensor And Presence Sensor
find more information on this in chapter "Advanced setting functions", Page • Depending on the colour and nature of your clothes, the distance detected may deviate from the setting. • When the presence sensor is activated, the power consumption during operation is increased minimally. Fujitsu... -
Page 24: Changing The Monitor Settings
Running a function Going to the previous setting Decreasing the set value Increasing the set value Accepting the applied settings and returning to the previous menu Rejecting the applied settings and returning to the previous menu Exiting OSD menu Fujitsu... -
Page 25: Functions Of The Control Panel And The Osd Menu
When an OSD menu button is activated for the first time, the language selection window will appear: ► Press the button or the button to choose the desired language. ► Press the button to confirm. After selecting the OSD language for the first time, you can change it at any time in the OSD. Fujitsu... -
Page 26: Setting Screen Display
This setting only appears with an analogue video signal (e.g. VGA). H-position Adjust the horizontal position With this function you move the picture to the left or to the right. This setting only appears with an analogue video signal (e.g. VGA). Fujitsu... - Page 27 Full screen = maximum picture size with distortion (no black bands) Keep aspect = Maximum picture size without distortion (black bands could appear in one direction) 1:1 = Centered image without scaling (black bands could appear in both directions) The 1:1 option is not available on all models. Fujitsu...
-
Page 28: Configuring The Osd Menu
OSD submenu. ► Press the button to mark a function in the submenu. ► Press the button to make the desired setting. ► Press the button to save the settings and return to the main menu. Fujitsu... - Page 29 Off = OSD menu will not be rotated On = OSD menu will be turned through 90°. Auto = orientation of the OSD menu will automatically be matched to the orientation of the monitor. The Auto setting only appears on models with a rotation sensor. Fujitsu...
-
Page 30: Advanced Setting Functions
This setting can be used to set the distance within which you want the sensor to react. If the vertical line is outside the setting bar, this will be judged as "absent" by the presence sensor. This setting can only be applied if the Presence Sensor function is active. Fujitsu... -
Page 31: Displaying Information
With a VGA data cable, the message Auto Processing is displayed. Displaying information ► Press the button to call up the main menu. ► Press the button to call up the Information window. Details such as the model designation, serial number, resolution, H/V frequency and ECO mode are displayed. Fujitsu... -
Page 32: Activate/Deactivate Eco Operating Mode
When the "Daisy-Chain" function is activated. • When the input signal to the "USB-C" monitor port is chosen. Press the button to call up the INPUT settings window if the monitor is not displaying an image and is in sleep mode Fujitsu... -
Page 33: Selecting The Application Mode
Mode for the display of photos Increased picture definition and colour saturation. Video Mode for the display of videos Enhanced reaction time (overdrive), dynamic contrast (ACR). Custom Mode for special application purposes Free choice of colour temperature, advanced configuration capabilities. Fujitsu... - Page 34 Operation The brightness set in Mode is stored under Office, Photo, Video and Custom. Fujitsu...
-
Page 35: Setting Colour Temperature And Colours
► Press the button to select the desired colour channel. ► Press the button to make the desired setting. ► Press the button to save the settings and return to the previous menu. Fujitsu... -
Page 36: Adjusting The Volume
Set the volume for playback with the integrated loudspeakers Mute Switch the loudspeakers off or on Input Change the audio input signal to another source This setting only appears when more than one audio input signal is present (e.g. Displayport and AUDIO-IN socket). Fujitsu... -
Page 37: Adjusting The Brightness And Contrast
This function improves the contrast by automatically controlling the background lighting in relation to the image being displayed. This setting can only be configured in Office and Custom application mode. As soon as ACR is enabled, Auto brightness is automatically disabled. Fujitsu... -
Page 38: Locking The Osd Menu
► Press the buttons at the same time and keep them pressed for a few seconds. The message Power button locked / unlocked is displayed. To remove the locking of the ON/OFF button again, proceed in the same way. Fujitsu... -
Page 39: Notes On The Program "Displayview
fine-tune the monitor to achieve optimal display results. The help programme also supports advanced functions such as Auto-Rotation. Your device may differ from the described scope of function in some areas. DisplayView Can be downloaded here: "http://www.fujitsu.com/fts/download" Function overview: OSD replacement for monitors equipped with DDC/CI •... -
Page 40: Using The Daisy Chain Function
DP1.2 ► Connect the display adapter to the "DP IN" port or to the USB-C port (underside) on the first monitor. ► Connect the next monitor via the "DP OUT" port. Fujitsu... - Page 41 As soon as the daisy chain function is enabled, automatic identification of other signal sources (e.g. HDMI) is disabled. ► Press the button to change the signal source manually. This automatically disables the Daisy Chain function. Fujitsu...
-
Page 42: Driver Installation
Driver installation The display drivers are automatically installed when the Microsoft Windows operating system is updated. ► For manual installation, download the monitor drivers from "http://www.fujitsu.com/fts/download". ► Unpack the zip file. ► Open the Device Manager and select directory Monitors. -
Page 43: Notes On Power Management
ECO mode is the preset factory default. Once an input is made at the computer the screen contents are restored. For detailed information on how energy-saving mode operates, please refer to the operating manual or technical manual of the computer. Fujitsu... -
Page 44: (Usb-Pd)
This monitor has been tested using systems developed by FUJITSU, which require a power supply of max. 60 W via USB-PD. For other systems, which only accept USB-PD chargers of their own brand due to special power supply guidelines, the USB-PD support provided by this monitor may be limited. -
Page 45: Notes On Low Blue Light Mode
When working continuously at a display screen, it is recommended that you take a five minute break every hour. During these breaks, do eye exercises to relax your eyes. To prevent eye strain and dryness, focus regularly on objects in the distance. Fujitsu... -
Page 46: Notes On Ergonomic Colour Adjustment
+ Colour combination very suitable - Colour combination not suitable because colour hues are too close together, thin characters are not identifiable or rigorous focusing is demanded of the human eye. Fujitsu... -
Page 47: Explanatory Information About Standard Iso 9241-307
According to ISO 9241-3 (Class I), a maximum of 2 lit and 2 unlit pixels plus 5 lit or 10 unlit subpixels, or a corresponding combination, may be faulty (1 lit subpixel counts as two unlit subpixels). Because Fujitsu supplies displays that are free of pixel faults, only subpixel faults enter into the evaluation. Fujitsu... -
Page 48: Troubleshooting
► Run the function Auto adjust (see Chapter "Setting screen display", Page 22). Picture is wrongly adjusted ► Run the function Factory Recall (see Chapter "Advanced setting functions", Page 26). The Auto Processing message appears. Fujitsu... - Page 49 ► Run the function Auto adjust (see Chapter noise) "Setting screen display", Page 22). The screen becomes darker The background lighting has a limited lifetime. If your monitor display should become too dark, the background lighting will have to be replaced. ► Contact our Service Desk. Fujitsu...
-
Page 50: Technical Specification
Technical specification Technical specification Condensation is not permitted, neither in the rated range of operation nor in the limit range of operation. Product name P24-9 TE Name of model P24-9T Dimensions and weight Visible diagonals 60.5 cm Dot pitch 0.2745 mm... -
Page 51: Vesa-Ddc-Compatible Vga Interface
800 x 600 60/75 Hz 1024 x 768 60/75 Hz 1280 x 720 60 Hz 1280 x 1024 60/75 Hz 1440 x 900 60 Hz 1600 x 900 60 Hz 1680 x 1050 60 Hz 1920 x 1080 60 Hz Fujitsu... -
Page 52: Video/Tv Operating Modes Via Displayport
16:9 SUB D port Meaning Video input red Video input green Video input blue Ground Ground Video ground red Video ground green Video ground blue +5 V (DDC) Sync. ground Ground DDC Data H. sync V. sync DDC Clock Fujitsu... -
Page 53: Hdmi Port
HDMI port Meaning TMDS Data2+ TMDS Data2 Shield TMDS Data2– TMDS Data1+ TMDS Data1 Shield TMDS Data1– TMDS Data0+ TMDS Data0 Shield TMDS Data0– TMDS Clock+ TMDS Clock Shield TMDS Clock– N.C. DDC/CEC Ground +5 V Power Hot plug detect Fujitsu... -
Page 54: Displayport Socket
Lane 1 (negative) Earth Lane 1 (positive) Lane 0 (negative) Earth Lane 0 (positive) Connected to earth Connected to earth Auxiliary channel (positive) Earth Auxiliary channel (negative) Hot Plug Detect Return for Power Power for connector (3.3 V 500 mA) Fujitsu... -
Page 55: Usb-C Port
SuperSpeed differential pair #2, RX, negative Bus power Sideband use (SBU) Non-SuperSpeed differential pair, position 2, negative Non-SuperSpeed differential pair, position 2, positive Configuration channel Bus power SuperSpeed differential pair #3, TX, negative SuperSpeed differential pair #3, TX, positive Ground return Fujitsu...
Need help?
Do you have a question about the P24-9 TE and is the answer not in the manual?
Questions and answers