Download  Print this page

Fujitsu Plasmavision P42HTA51E Series User Manual

Wide plasma display
Hide thumbs

Advertisement

Quick Links

Before using the display, read this manual carefully so that you know how to use the display correctly.
Refer to this manual whenever questions or problems about operation arise. Be sure to read and observe the safety precautions
(see the separate "Safety Precautions" manual).
Keep this manual where the user can see it easily.
* Installation and removal require special expertise. Consult your product dealer for details.
* When "English" is selected at "Language" of the on-screen display, "colour" will be displayed in the case of the E model and "color"
will be displayed for all other models.
The notation used in this user's manual is "color".
* The last digit of MODEL NO. (10 digit alphanumeric characters) indicated on the product means the body color indication alphabet
or the management number.
USER'S MANUAL
WIDE PLASMA DISPLAY
P42HTA51E SERIES
P50XTA51E SERIES

Advertisement

loading

  Related Manuals for Fujitsu Plasmavision P42HTA51E Series

  Summary of Contents for Fujitsu Plasmavision P42HTA51E Series

  • Page 1 Before using the display, read this manual carefully so that you know how to use the display correctly. Refer to this manual whenever questions or problems about operation arise. Be sure to read and observe the safety precautions (see the separate "Safety Precautions" manual). Keep this manual where the user can see it easily.
  • Page 2: Table Of Contents

    CONTENTS INFORMATION ...E-3 ACCESSORIES ...E-4 ATTACHING THE FERRITE CORES ...E-4 INSTALLATION ...E-5 PART NAMES AND FUNCTIONS ...E-6 DISPLAY SECTION – FRONT ...E-6 DISPLAY SECTION – BACK ...E-6 DISPLAY SECTION – BOTTOM ...E-7 REMOTE CONTROL ...E-8 USING THE REMOTE CONTROL...E-10 PUTTING BATTERIES IN THE REMOTE CONTROL ...E-10 PRECAUTIONS ...E-10 EFFECTIVE RANGE FOR THE REMOTE CONTROL ...E-10 CONNECTING THE DISPLAY TO EXTERNAL...
  • Page 3: Information

    INFORMATION • Receptacle Make sure that the power cord’s grounding wire is grounded. The plasma display comes with a 3-prong power plug; one prong is connected to the grounding wire. If you have only a 2-hole receptacle, you will need to have it replaced. Contact your dealer for more information. •...
  • Page 4: Accessories

    INFORMATION (Continued) ACCESSORIES Safety This manual Precautions Manual Manual Small ferrite Large ferrite core core (2) ATTACHING THE FERRITE CORES Be sure to turn OFF the power to the display and external equipment before making any connections. No cables are supplied with the display for connection to external equipment. The type of cable to be used varies depending on the PC model.
  • Page 5: Installation

    INSTALLATION • To prevent the plasma display’s internal components from overheating, make sure that the plasma display is installed in a well-ventilated location. • Be sure to use the optional stand, wall-mounting unit or the other mounting unit when installing the plasma display. Also, be sure that your dealer performs the installation.
  • Page 6: Part Names And Functions

    PART NAMES AND FUNCTIONS DISPLAY SECTION – FRONT DISPLAY SECTION – BACK Warning If the power indicator lamp flashes red or green, this signifies that the display has developed a problem. When this happens, be sure to remove the power plug from the receptacle and contact your dealer. Leaving the display power ON can result in fire or electric shock. Input mode selection button Switches the input modes (Video mode, RGB mode and TV mode).
  • Page 7: Display Section - Bottom

    DISPLAY SECTION – BOTTOM /I power switch If this button is pressed when the power indicator lamp is off, the indicator lamp will light. The power can be turned on and the standby mode selected by using the remote control or the control panel of the display. If this button is pressed when the power indicator lamp is lit, the indicator lamp will go out.
  • Page 8: Remote Control

    PART NAMES AND FUNCTIONS (Continued) REMOTE CONTROL For details, see page (POWER button) E-12 Switches between Power On and Standby. (WIDE button) E-16 Press to switch the screen size. (TV input mode selector button) Press to watch terrestrial broadcastings. (Video input mode selector button) Press to switch through VIDEO1 to VIDEO5.
  • Page 9 Note • Functions may not be available with some models and some device options. (ENTER button) E-18–E-29 Press to fix the entry in the ADJUSTMENT MENU. (DUAL/STEREO button) E-15 Press to select the audio mode for stereo/dual-channel audio broadcasting. (COLOR button) In the teletext broadcasting, press these buttons to switch through the pages stored to each of the four colors in the LIST mode.
  • Page 10: Using The Remote Control

    USING THE REMOTE CONTROL PUTTING BATTERIES IN THE REMOTE CONTROL (1) To remove the cover, slide it outwards while pressing it down. PRECAUTIONS To prevent malfunction, do not apply any form of severe shock to the remote control. To prevent malfunction or deformation, do not allow the remote control to become wet and keep it away from hot surfaces or heating equipment.
  • Page 11: Connecting The Display To External Equipment

    CONNECTING THE DISPLAY TO EXTERNAL EQUIPMENT DVD RECORDER/PLAYER, SATELLITE TUNER • Connects to the antenna input terminal on the display bottom. • Connect the video signal cable to the component video input terminal, HDMI input terminal, S-video input terminal, or the video input terminal. •...
  • Page 12: Basic Operations

    BASIC OPERATIONS TURNING THE POWER ON AND STAND-BY Press OFF/ON BY state. The power lamp lights up. Press The color of the power lamp changes from “Red” to “Green”. Press press Select TV or the picture mode to input. Press The color of the power lamp changes from “Green”...
  • Page 13: Watching A Tv Broadcasting

    WATCHING A TV BROADCASTING Select the country. Select the country using the Auto Store function in the CHANNEL SETTING menu (see page E-26). This enable the terrestrial broadcastings to be watched for selected country. Press Available to watch the terrestrial broadcastings. The last Program No.
  • Page 14: Watching A Teletext Broadcastings

    BASIC OPERATIONS (Continued) WATCHING A TELETEXT BROADCASTINGS Display the TV program. Press Press This enables teletext broadcasts to be viewed. (superimposed over the TV program) The teletext broadcasting INDEX screen is received. * Whenever • Displays the teletext page program. The teletext page program is displayed when 3 digit number by •...
  • Page 15: Rgb Input Mode

    RGB INPUT MODE Press The input terminal of RGB mode is as follows. • RGB1: mD-sub * For selection of the input terminal, see “SETTING THE INPUT TERMINALS” on P. E-25. CONVENIENT FUNCTIONS DISPLAY Displaying on-screen information. Press The channel or mode is indicated on the screen for 5 seconds. PICTURE MODE Press This button can be used to switch the picture mode.
  • Page 16: Watching Pictures On The Wide Screen

    WATCHING PICTURES ON THE WIDE SCREEN SWITCHING BETWEEN SCREEN SIZES Press The currently selected mode will appear. Press Size. Each time you press appears. The sequences used are as follows: When you are in a Video input mode When you are in an RGB input mode * Depending on the type of signal, some aspects * You can also use the buttons on the display’s control...
  • Page 17: Screen Size

    SCREEN SIZE Normal (Video/RGB) Displays pictures of normal size (i.e., a 4:3 aspect ratio). Wide1 (Video) Displays natural-looking pictures of standard size on the wide screen. Wide2 (Video)/Wide (RGB) Ideal for displaying vertically extended pictures such as squeezed pictures. Zoom1 (Video)/Zoom (RGB) Enlarges horizontally extended pictures equally in all directions to maintain the aspect ratio constant.
  • Page 18: Adjustment Menu

    ADJUSTMENT MENU The numbers in parentheses ( ) indicate the reference page numbers. PICTURE (E-19) Signal Contrast MENU POSITION/SIZE (E-22) Position AUDIO (E-23) Treble FEATURES (E-24)) Adjustment FACTORY DEFAULT (E-29) Note • Some type of signal can not be selected. E-18 (E-20) Drive Contrast...
  • Page 19: Basic Procedure Of Adjustment Menu Operations

    BASIC PROCEDURE OF ADJUSTMENT MENU OPERATIONS • Below is shown the basic procedure to make changes to the options in the ADJUSTMENT MENU. (Ex.: adjusting tint setting (Tint)) Press The main menu screen will appear. Press Each time you press menus appears in the following sequence: PICTURE FACTORY DEFAULT...
  • Page 20: Adjusting The Picture

    ADJUSTING THE PICTURE • Picture-related items can be set and adjusted in the Picture Adjustment Screen. See BASIC PROCEDURE OF ADJUSTMENT MENU OPERATIONS on page E-19 for the basic operation procedures. Signal Contrast Press to increase the input signal contrast. Press to reduce the input signal contrast.
  • Page 21: Color Temp

    Color Temp. “Color Temperature” can be set. Each time is pressed, the color temperature mode is switched as shown below. Warm Standard Cool [Warm]: More reddish colors [Cool]: More bluish colors Press to store. Picture Memory The adjustment status of eight groups of picture adjustment settings can be stored, enabling you to quickly switch to your desired group of settings for the picture you are planning to watch.
  • Page 22: Adjusting Screen Position And Size

    ADJUSTING SCREEN POSITION AND SIZE • You can make changes to all screen adjustment options in the POSITION/SIZE Menu. See Page E-19 for the basic operation procedures. • The changes you make will be stored for the selected input mode. Therefore, you need to select a desired input mode before making any changes.
  • Page 23: Adjusting Audio

    ADJUSTING AUDIO • You can make changes to all audio adjustment options in the AUDIO Menu. See Page E-19 for the basic operation procedures. • The changes you make will be stored for the selected input mode. Therefore, you need to select a desired input mode before making any changes.
  • Page 24: Other Adjustments

    OTHER ADJUSTMENTS FEATURES setup screen has the following 5 options. See Page E-19 for the basic operation procedures. [Adjustment]: Can make a fine adjustment of pictures such as Dot Clock, Clamp Position. [On Screen Menu]: Can make a display setting such as OSD, Language. (See P. E-24.) [Input Terminal]: Can make an input terminal setting such as Video Input.
  • Page 25: Name Selection (Name Select

    Name Selection (Name Select) You can change the settings for indications for video inputs and RGB inputs. Video input You can change the settings for indications for the VIDEO inputs. Select the desired indication in accordance with the connected equipment. Each time is pressed, the setting is switched.
  • Page 26: Channel Setting

    OTHER ADJUSTMENTS (Continued) CHANNEL SETTING Press to select the items for setting. It is switched as shown as below. Auto Store Manual Store Press to proceed to the next step. Auto Store Press to select the country or region, and then press All the channels are scanned, and only the channels that can be received are assigned to the Program Nos.
  • Page 27: Other Settings

    OTHER SETTINGS Auto Off-NO SIG. You can make to the standby state automatically when the no signal state continued during set up time. Press to select the “Time”. Press to select the amount of time before the standby state starts. 1 min.
  • Page 28: Direct Setting

    OTHER ADJUSTMENTS (Continued) (6) Press to store. * When the Screen Orbiter function is operated, some letters at the top, bottom, right or left of the screen may be missed. Direct Setting You can use this option to switch the setting for RGB input signal. Each time you press , one of the available choices appears in the following sequence: Auto...
  • Page 29: Initialization Of User Adjustment Value

    INITIALIZATION OF USER ADJUSTMENT VALUE You can restore the values of the adjustment/setting made in the MENU to factory settings. Press The main menu screen will appear. Press DEFAULT”. Each time you press menus appears in the following sequence: PICTURE FACTORY DEFAULT The FACTORY DEFAULT Menu screen will appear.
  • Page 30: Options

    To prevent injury, fire, and electric shock, arrange for options to be initially installed (or installed at a different location) by your dealer. CAUTION This display (P42HTA51/P50XTA51) is for use only with Fujitsu General Limited's option (P-WB4201, P-CT4200, P-TT4202). Using this display with other option can cause instability resulting in possible injury.
  • Page 31: Main Supported Signals

    MAIN SUPPORTED SIGNALS This display can store the latest four types of signals for RGB adjustment value. The fifth input signal will replace the adjustment value of the first input signal. To do this, select a desired signal and follow the instructions in “Adjusting Screen Position and Size” on P. E-22 to adjust the parameters. When you finish, the settings will be automatically stored.
  • Page 32: Table Of Tv Frequencies

    TABLE OF TV FREQUENCIES TABLE OF TV FREQUENCIES [Applicable Countries] [Applicable Countries] Poland Austria, Belgium, Denmark, Finland, Germany, Greece, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland, Luxemburg, Israel, Cyprus Frequency (MHz) Frequency (MHz) Frequency (MHz) Frequency (MHz) 48.25 495.25 49.75 55.25 503.25 59.25 62.25...
  • Page 33: Specifications

    1.9 m or 6.2 feet for 50”) from the screen and to look occasionally away while working. • is a worldwide trademark of Fujitsu General Limited and is a registered trademark in Japan, the U.S.A. and other countries or areas.
  • Page 34: Cleaning And Maintenance

    CLEANING AND MAINTENANCE Precautions Be sure to remove the power plug from the receptacle before cleaning the display. Be sure not to clean the display using a cloth dampened with volatile solvents, such as benzene or thinner. Such solvents can harm the display’s cabinet, the filter at the screen front, and the remote control.

This manual is also suitable for:

Plasmavision p50xta51e series