PerkinElmer RamanMicro 300 Series Getting Started Manual page 78

78 . RamanMicro 300 Getting Started Guide
8. If you wish these parameters to be stored as a new set of experimental setup default
parameters, select Save As from the File menu.
Experimental parameters are stored as *.REX files. This is the "Raman Experiment" file.
If you would like to save this set of parameters as the default set, that loads when the
software is opened, then save your experiment settings as Default.rex.
If you select Save from the File menu, the current experimental parameters are stored
as the default parameters in the software.
NOTE: The Spectrum software automatically saves to the currently loaded .REX file, without
prompting, any configuration changes made that affect the safety of the instrument,
such as the beampath selection. You should be aware of this when creating your own
.REX file and, as soon as you have saved the configuration you want to be retained,
you should reload DEFAULT.REX (or some other .REX file), using the Load
Experiment File option from the File menu.
NOTE: In Spectrum ES, the File menu options Save and Save As are not available to users
logged on as an Analysts. The role of an Analyst is to use .REX files prepared by
Administrators.