Connecting The Motorized Stage - PerkinElmer RamanMicro 300 Series Getting Started Manual

40 . RamanMicro 300 Getting Started Guide

Connecting the Motorized Stage

The motorized stage is powered by the stage controller box (L1860289) and joystick
(L1865723).
Figure 12 Stage controller and joystick
To connect the motorized stage:
1. Connect the cable from the joystick to the socket labeled JOYSTICK on the rear panel
of the stage controller box (Figure 13).
Figure 13 Rear panel of the Stage Controller Box
2. Connect the cable from the socket on the right side of the stage to the MOTOR X, and
MOTOR Y sockets on the rear panel of the stage controller box.
3. Connect the RS232 cable (L1865749) from the PC to the socket labeled RS232 on the
rear panel of the stage controller.
4. Connect the power cable from the stage controller box to the mains supply.