PerkinElmer RamanMicro 300 Series Getting Started Manual page 55

Raman Instrument Configuration Disk
22. Place your
seconds, and then click Copy Configuration Files.
If your configuration files have already been installed on your PC, click Browse and
navigate to their location before you click Copy Configuration Files.
The Install PerkinElmer Raman Instrument page is displayed.
23. Attach your RamanStation to the PC using the supplied USB 2.0 cable (L1320821).
Figure 20 USB 2.0 cable
NOTE: If you disconnect the instrument control USB cable and reattach it to a different USB
port, then you will be prompted for the drivers. By default this driver is stored in
C:\Program Files\PerkinElmer\ServiceIR\Raman.
Installing Your RamanMicro 300 . 55
into your CD drive, wait a few