Cd-Rom Drive - Fujitsu 565Tx User Manual

C A U T I O N
Do not operate your CD-ROM drive unless
your notebook is sitting on a flat surf a c e
and the adjustment feet are folded against
the bottom of the notebook. Using a CD
when the drive is not level may damage
the drive or prevent proper operation.

CD-ROM DRIVE

The modular C D - ROM drive is a 20-speed
m a x i mum modular re ader.
Loading a CD
Make sure that the angle adjustment feet
on the bottom of your notebook are folded
against the bottom of casing and your note-
book is on a flat,level surface.
Make sure there is power to your notebook.
U s i n g Y o u r L i f e B o o k 5 0 0 S e r i e s
Push, gently but firmly on the Eject button
on the front of the CD-ROM drive to open
the CD-ROM holder tray, the tray will come
out a short distance.
Gently pull the tray out until a CD-ROM can
be easily placed in the tray.
If t h ere was a pro tective sheet in the tray wh en
it was shipped ,m a ke su re it has been rem oved .
Place the CD into the tray, label side up, with
the hole in the center of the CD snapped
onto the raised circle in the center of the tray.
Close the tray.
After the CD is loaded,it will take a short
time for your notebook to recognize it.
L i f e B o o k ™ 5 0 0 S e r i e s f r o m F u j i t s u
P O I N T
If you have disabled your Windows
CD automatic insertion function you will
have to start the CD from your desktop,
as your notebook will not automatically
recognize that the CD has been loaded.
Figure 2-14 CD-ROM Handling
™
95
®
37