Related Manuals for Fujitsu lifebook e736
Summary of Contents for Fujitsu lifebook e736
- Page 1 System Operating Manual FUJITSU LIFEBOOK E736 FUJITSU LIFEBOOK E746 FUJITSU LIFEBOOK E756...
- Page 2 You can find driver updates at: "http://support.ts.fujitsu.com/download" Should you have any technical questions, please contact: • our Hotline/Service Desk (see the Service Desk list or visit: "http://support.ts.fujitsu.com/contact/servicedesk") • Your sales partner • Your sales office We hope you enjoy working with your new Fujitsu system!
- Page 4 Published by / Contact address in the EU Fujitsu Technology Solutions GmbH Mies-van-der-Rohe-Straße 8 80807 Munich, Germany "http://www.fujitsu.com/fts/" Copyright © Fujitsu Technology Solutions GmbH 2015. All rights reserved. Publication Date 10/2015 Order No.: A26391-K445-Z320-1-7619, edition 1...
- Page 5 FUJITSU LIFEBOOK E736 FUJITSU LIFEBOOK E746 FUJITSU LIFEBOOK E756 Operating Manual Innovative technology Ports and controls Important notes First-time setup of your device Working with the notebook Security functions Connecting external devices Removing and installing components during servicing Settings in BIOS Setup Utility...
- Page 6 Information on the product description meets the design specifications of Fujitsu and is provided for comparison purposes. Several factors may cause the actual results to differ. Technical data is subject to change without prior notification. Fujitsu rejects any responsibility with regard to technical or editorial mistakes or omissions.
-
Page 7: Table Of Contents
Using the power-management features ........... 41 Fujitsu... - Page 8 Removing a hard disk ............. . . 70 Fujitsu...
- Page 9 Index ................. . 88 Fujitsu...
- Page 10 Contents Fujitsu...
-
Page 11: Innovative Technology
The Windows drivers for your device can be found on our Internet site. The factory installation of your device does not support any other operating system. Fujitsu Technology Solutions accepts no liability whatsoever if any other operating system is used. -
Page 12: Notational Conventions
"Safety information" • cross-references to an external source, e.g. a web address: For more information, go to "http://www.fujitsu.com/fts/" • Names of CDs, DVDs and titles or designations for other materials, e.g.: "CD/DVD Drivers & Utilities" or "Safety/Regulations" manual indicates a key on the keyboard, e.g:... -
Page 13: Ports And Controls
This chapter presents the individual hardware components of your device. It gives an overview of the indicators and ports of the device. Please familiarise yourself with these components before you start to work with the device. Front LIFEBOOK E736: 1 = Microphone (optional) 7 = Status indicators 2 = WebCam (optional) - Page 14 7 = Status indicators 2 = WebCam (optional) 8 = Application keys 3 = WebCam LED (optional) 9 = ON/OFF switch 4 = Touchpad 10 = Fingerprint sensor (optional) 5 = Loudspeakers 11 = Touchpad buttons 6 = TouchStick (optional) Fujitsu...
- Page 15 Left side 1 = DC input connector (DC IN) 5 = DisplayPort 2 = Ventilation slots 6 = USB port 3.0 3 = LAN port 7 = SmartCard reader (optional) 4 = Monitor port (VGA) 8 = Memory card slot Fujitsu...
- Page 16 2 = Microphone port 6 = Security Lock device 3 = USB 3.0 port 4 = USB 3.0 port with charging function (Anytime USB charge) Rear 1 = USB 2.0 port (only LIFEBOOK E746/E756) 2 = HDMI port (only LIFEBOOK E756) Fujitsu...
- Page 17 Bottom 1 = Module release 5 = Ventilation slot cover 2 = Battery release 6 = Memory service compartment 3 = Port replicator port 7 = Hard disk service compartment 4 = Battery compartment (SIM card under the battery) Fujitsu...
-
Page 18: Important Notes
(e.g. petrol station, paintshops), as the transmitted radio waves can cause an explosion or a fire. For information on how to switch radio components on and off, see chapter "Switching the wireless components on and off", Page Fujitsu... -
Page 19: Energy Saving
► Enquire with the corresponding government office of the country you will be travelling in as to whether you may operate the radio component integrated in your notebook there (see also "CE marking", Page 86). Fujitsu... -
Page 20: Notebook: Transporting
The surface can be cleaned with a dry cloth. If particularly dirty, use a cloth which has been moistened in mild domestic detergent and then carefully wrung out. To clean the keyboard and the touchpad, if available, you can use disinfectant wipes. Ensure that no liquid enters the device. Fujitsu... -
Page 21: First-Time Setup Of Your Device
► Unpack all the individual parts. Packaging Transport ► Check your device for any visible damage which may have occurred during transportation. You may need the packaging in the future, if you need to transport your device. Fujitsu... -
Page 22: Selecting A Location
This effect is harmless. The device meets all relevant safety standards. ► Connect the power cable (1) to the mains adapter. ► Plug the mains cable (2) into a mains outlet. ► Connect the mains adapter cable (3) to the DC jack (DC IN) of the device. Fujitsu... -
Page 23: Switching On The Device For The First Time
If a Windows operating system is installed on your device, you will find more information on the system and drivers, help programmes, updates, manuals etc. on the device or on the Internet under "http://www.fujitsu.com/fts/support/". You can find information and help on the Windows operating system functions on the Internet at "http://windows.microsoft.com". -
Page 24: Working With The Notebook
The indicator lights up orange: The battery is charged to between 13% and 49% of its maximum capacity. The indicator lights up red: The battery is charged to between 0% and 12% of • its maximum capacity. • Indicator flashes red: An error has occured. Fujitsu... - Page 25 The effect that this key has varies between applications. Energy saving functions indicator • Indicator is illuminated: One of the energy saving functions is activated. • The indicator is not illuminated: The energy saving functions have been deactivated. Fujitsu...
-
Page 26: Switching On The Notebook
Back up your data and close all applications before you switch off your device. Otherwise data might be lost. ► Shut down the operating system correctly. Notebook ► If the notebook is not switched off automatically, press the ON/OFF switch for approx. five seconds. ► Close the LCD screen. Fujitsu... -
Page 27: Keyboard
The figure below shows how to access the different characters on keys with overlaid functions. The example applies when the Caps Lock key has not been activated. The illustrations shown below may differ from your actual device. Alt Gr Fujitsu... - Page 28 The cursor keys move the cursor in the direction of the arrow, i.e. up, down, left, or right. Cursor keys Cursor controlkeys Windows key The Windows key switches between the start screen and the last used application. Windowskey Menu key The Menu key opens the menu for the active application. Fujitsu...
-
Page 29: Virtual Numeric Keypad
Numeric keypad Virtualnumerickeypad Num Lock LIFEBOOK E736 and LIFEBOOK E746 have virtual number blocks, LIFEBOOK E756 has a separate number block. To provide the convenience of a numeric keypad, your keyboard is equipped with a virtual numeric keypad. The special keys of the virtual numeric keypad are recognisable by the numbers and symbols printed in the upper right corner of each key. -
Page 30: Separate Number Block
Separate number block Numeric keypad Separatenumeric keypad Num Lock LIFEBOOK E736 and LIFEBOOK E746 have virtual number blocks, LIFEBOOK E756 has a separate number block. The keyboard of your notebook has a separate number block on the far right. Key combinations Keycombinations The following description of key combinations applies to Windows operating systems. - Page 31 This key combination opens the Windows security/Task-Manager Ctrl window. Ctrl+Alt+Del Back tab This key combination moves the cursor back to the previous tab stop. Shift+Tab Backtab Key combinations using the Windows keys are detailed in the manual for your operating system. Fujitsu...
-
Page 32: Country And Keyboard Settings
For a description of the indicator colours, "Status indicators", Page Wireless Components key This application key is used to start the WirelessSelector software. The wireless components that have been activated in the BIOS Setup can be switched on and off individually. Fujitsu... -
Page 33: Touchpad And Touchpad Buttons
► Tap the touchpad once or press the left button once. The item is selected. Executing commands ► Move the pointer to the field you wish to select. Touchpad ► Tap the touchpad twice or press the left button twice. The command is executed. Fujitsu... -
Page 34: Dragging Items
LCDscreen Notes High-quality LCD screens (TFT) are installed in Fujitsu notebooks. For technical reasons, these screens are manufactured for a particular resolution. An optimum and sharp image can only be ensured with the resolution intended for the particular screen. A screen resolution which differs from the specification can result in an unclear image. -
Page 35: Webcam
LCD screen may flicker while the light level is adjusted. Further information on using the webcam and on the additional settings which are possible for your webcam can be found in the help function of the program which uses the webcam. Fujitsu... -
Page 36: Rechargeable Battery
Never store the batteries in the device. Removing and installing the battery Only use batteries approved by Fujitsu for your notebook. Never use force when fitting or removing a battery. Make sure that no foreign bodies get into the battery connections. -
Page 37: Removing A Battery
"Preparing to remove components", Page ► Slide the release button in the direction of the arrow (1). ► Slide the release button in the direction of the arrow (2) and hold it in place. ► Remove the battery from the battery compartment (3). Fujitsu... -
Page 38: Installing A Battery
► Position the battery at the edge. ► Insert the battery into the battery compartment until it engages positively (1). ► Slide the release button in the direction of the arrow (2). ► Complete the insertion process, see chapter "Finishing component removal", Page Fujitsu... -
Page 39: Module
The module can now be removed without any further actions being necessary. Removing a module Module Drive WeightSaver ► Slide the release mechanism (1) in the direction of the arrow and hold. ► Pull the module (2) out of the module bay. Fujitsu... -
Page 40: Installing A Module
Working with the notebook Installing a module ► Place the module into the module bay so that the contacts enter first. ► Push the module into the module bay until you feel it locking into place. Fujitsu... -
Page 41: Optical Drive
If the CD/DVD indicator does not go out after a data carrier has been inserted, but instead continues to flash, this means that the drive cannot access the data carrier. Either the data carrier is damaged or dirty or you are using a data carrier that the drive cannot read. Fujitsu... -
Page 42: Inserting Or Removing A Data Carrier
► Switch your notebook off. ► Push a pen or a piece of wire (such as a paperclip) firmly into the opening (1). The drive tray is ejected. You can now pull the drive tray (2) out of the drive. Fujitsu... -
Page 43: Removing And Fitting The Dust Removal Cover (Ventilation Slot Cover)
► Prepare for removal, see chapter "Preparing to remove components", Page ► Press and hold the lock of the ventilation slot cover (1) and remove it from its slot (2). ► Clean the dust chamber. Fujitsu... - Page 44 Working with the notebook ► Insert the ventilation slot cover into the slot (1) at an angle as shown, and ensure that you feel it click into place. ► Complete the removal, see chapter "Finishing component removal", Page Fujitsu...
-
Page 45: Using The Power-Management Features
If you do not intend to use your notebook for a long period of time: ► Exit power saving mode if necessary via the mouse or keyboard or by switching on the notebook. ► Close all opened programs and completely shut down the notebook. Fujitsu... -
Page 46: Memory Cards
(see the documentation for your operating system). ► On devices with card locking: Press on the memory card (1). Memory card The memory card is released and can now be removed. ► Pull the memory card out of the slot (2). Fujitsu... -
Page 47: Loudspeakers And Microphones
If you attach an external microphone, the built-in microphone is disabled. When you connect headphones or external speakers, the built-in speakers are disabled. Information on connecting headphones and a microphone can be found "Connecting external devices", Page Fujitsu... -
Page 48: Sim Card
Inserting the SIM card ► Prepare for installation of the SIM card, see chapter "Preparing to remove components", Page ► Remove the battery, see "Removing a battery", Page ► Pull the SIM card holder out of the slot (1). Fujitsu... - Page 49 ► Insert the SIM card (2) into the SIM card holder as shown in the diagram on the SIM card holder. ► Push the SIM card holder back into the slot (3). ► Install the battery again, see "Installing a battery", Page ► Complete the installation, see chapter "Finishing component removal", Page Fujitsu...
-
Page 50: Removing The Sim Card
► Remove the SIM card from the SIM card holder (2). ► Push the SIM card holder back into the slot (3). ► Install the battery again, see "Installing a battery", Page ► Complete the removal, see chapter "Finishing component removal", Page Fujitsu... -
Page 51: Wireless Lan/Bluetooth/Umts/Lte Radio Components
Working with the notebook Wireless LAN/Bluetooth/UMTS/LTE radio components The installation of radio components not approved by Fujitsu will invalidate the certifications issued for this device. Switching the wireless components on and off ► Press the button to start the WirelessSelector. -
Page 52: Access Via Umts/Lte
Working with the notebook Access via UMTS/LTE You can purchase the accessories for UMTS/LTE reception from your retailer or your Fujitsu Technology Solutions dealer. If you have ordered a UMTS/LTE module, your device will already be prepared when you receive it. -
Page 53: Your Port Replicator
5 = Display ports 12 = Release 6 = DVI-D monitor port 7 = VGA monitor port The DVI port and the neighbouring DisplayPort cannot be used at the same time. Fujitsu... -
Page 54: Connecting The Notebook To The Port Replicator
► Disconnect the mains adapter cable from the DC socket (DC IN) of the notebook. ► Position the notebook so that it is in line with the back edge of the Port Replicator. ► Place the notebook onto the Port Replicator (1) and ensure that it locks into place correctly. Fujitsu... -
Page 55: Connecting The Mains Adapter To The Port Replicator
Port Replicator of the same type. Switching on the notebook via the port replicator ► Press the ON/OFF switch on the port replicator to switch the notebook on. The power-on indicator of the Port Replicator lights up. Fujitsu... -
Page 56: Disconnecting The Notebook From The Port Replicator
We recommend that the notebook is switched off or that the appropriate undocking function provided by the operating system is executed. ► Pull the unlocking lever in the direction of the arrow (1), until you hear the notebook unlatch. ► Lift off the notebook (2). Fujitsu... -
Page 57: Security Functions
The fingerprint sensor can record an image of a fingerprint. With additional fingerprint software, this image can be processed and used instead of a password. ► You must install the fingerprint software in order to be able to use the fingerprint sensor (1). Fujitsu... -
Page 58: Using The Security Lock
Kensington Lock Cable, a sturdy steel cable, to help protect your notebook from theft. The Kensington Lock Cable is available as an accessory. Fujitsu recommends the use of a combination lock. ► Fit the Kensington Lock Cable to the mechanism on your notebook. -
Page 59: Protecting Bios Setup Utility (Supervisor And User Password)
You can only change the supervisor password when you have logged into the BIOS Setup Utility with the supervisor password. Password Supervisorpassword User password ► Call the BIOS Setup Utility and go to the Security menu. ► When changing the password, proceed exactly as for password assignment. Fujitsu... -
Page 60: Password Protection For Booting Of The Operating System
If a supervisor password has been assigned, a password for the hard disk can also be set in the Hard Disk Security menu. The hard disk is protected by this password. Data on this hard disk can only be read into another system if the correct password has been entered. Fujitsu... -
Page 61: Trusted Platform Module (Tpm) (Device-Dependent)
► Select the "Security Chip" "Disabled" entry to deactivate the TPM ► From the Exit menu, choose the option Exit Saving Changes. ► Press the Enter key and select Yes. Your notebook will now restart and TPM will be disabled. Fujitsu... -
Page 62: Smartcard Reader
SmartCard with you. In order to be able to take advantage of all the security features of your notebook, you will need a CardOS SmartCard from Fujitsu. The SmartCard can only be used with a PIN, offering maximum protection even if you lose the SmartCard. -
Page 63: Connecting External Devices
For more information about whether or not devices need to be switched off, please refer to the documentation supplied with the external device. Some of the external devices require special drivers (see the operating system and external device documentation). Fujitsu... -
Page 64: Connecting An External Monitor
"Key combinations", Page You can display the same picture on the external monitor and the notebook LCD monitor simultaneously. If you wish to operate the monitor via a DVI port, use the optional Port Replicator available for your notebook. Fujitsu... -
Page 65: Hdmi Port
The HDMI port on your notebook can be used to connect an external amplifier, LCD TV or a plasma TV with an HDMI connection. ► Connect the data cable to the external device. ► Connect the data cable to the HDMI port of the notebook. Fujitsu... -
Page 66: Connecting Usb Devices
Additional information can be found in the documentation for the USB devices. ► Connect the data cable to the external device. ► Connect the data cable to a USB port of the notebook. Device drivers USB devices will be automatically recognised and installed by your operating system. Fujitsu... -
Page 67: Usb Port With Charging Function (Anytime Usb Charge)
► Left click on the icon to safely remove hardware, located in the taskbar. ► Select the device which you want to shut down and remove. ► Press the Enter key. Wait for the dialogue box which tells you that it is now safe to remove the device. Fujitsu... -
Page 68: Connecting External Audio Devices
If you purchase a cable from a retailer, please note the following information: The headphone port on your notebook is a "3.5 mm jack socket". If you want to connect headphones or a speaker you will need a "3.5 mm jack plug". Fujitsu... -
Page 69: Removing And Installing Components During Servicing
The equipment and tools you use must be free of static charges. • Remove the power plug from the mains supply before inserting or removing boards containing ESDs. • Always hold boards with ESDs by their edges. • Never touch pins or conductors on boards fitted with ESDs. Fujitsu... -
Page 70: Preparing To Remove Components
Otherwise, there is a risk of suffering burns! As some components are exposed that are sensitive to static electricity, please take note of chapter "Notes on installing and removing boards and components", Page Fujitsu... -
Page 71: Removing A Cover
► Lift the cover off the notebook (2). Removing memory modules ► Carefully push the two mounting clips outwards (1). Memory expansion Memory module The memory module snaps upwards (2). ► Pull the memory module out of its slot in the direction of the arrow (3). Fujitsu... -
Page 72: Installing A Memory Module
► Carefully push the memory module downwards until you feel it click into place (2). Attaching the cover ► Place the cover in the correct mounting position (1). ► Tighten the screw (2). ► Complete the installation, see "Finishing component removal", Page Fujitsu... -
Page 73: Removing And Installing The Hard Disk
If you install the wrong screws, components may be damaged. The screws are not all the same length and when the cover is installed, the correct screws must be used. ► Lift the cover off the notebook (2). Fujitsu... -
Page 74: Removing A Hard Disk
► To release the hard disk from the contacts, pull the hard disk in the direction of the arrow (1). ► Remove the hard disk from the hard disk compartment (2). ► Pull off the hard disk carriers (3). Fujitsu... -
Page 75: Installing A Hard Disk
► Attach the hard disk carriers to the hard disk (1). ► Place the hard disk into the hard disk compartment (2). ► Pull the hard disk in the direction of the arrow (3) until it engages in the contacts. Fujitsu... -
Page 76: Attaching The Cover
► Install the battery again (see "Installing a battery", Page 34). ► Turn the notebook the right way up again and place it on a flat surface. ► Reconnect the cables that you disconnected before. Fujitsu... -
Page 77: Settings In Bios Setup Utility
► Press the function key ► If a password has been assigned, enter the password and press the Enter key. If you have forgotten the password, contact your system administrator or contact our customer service centre. The BIOS Setup Utility starts. Fujitsu... -
Page 78: Operating Bios Setup Utility
► Select the option you want to change with the cursor keys ↑ ↓ ► Press the Enter key. ► Press the key to exit the selected menu. ► For future reference, make a note of the changes you have made (for example, in this manual). Fujitsu... -
Page 79: Exiting Bios Setup Utility
► If you want to exit BIOS Setup Utility with these settings, choose Exit Saving Changes and Yes. Save Changes and Power Off ► To save the changes and switch off your device, select Save Changes and Power Off and Yes. The changes are saved. Your device is shut down. Fujitsu... -
Page 80: Troubleshooting And Tips
PC if you are running processor-intensive gaming software, e.g. games with intensive 3D graphics. Updating your hardware with drivers which have not been approved by Fujitsu Technology Solutions may result in performance losses, data losses or malfunction of the equipment. A list of approved drivers and current BIOS versions can be downloaded from: "http://support.ts.fujitsu.com/Download/Index.asp"... -
Page 81: Restoring The Hard Disk Contents Under Windows
When certain characters are entered on the keyboard, only numerals are written Abeepsounds everysecond Cause Troubleshooting The virtual numeric keypad of your device is ► Press the key. activated, see "Virtual numeric keypad", Page 25 Fujitsu... -
Page 82: The Notebook's Lcd Screen Remains Blank
► Check whether the data cable is properly connected to the notebook and the external monitor (if it is plugged in with a connector). ► Switch on the external monitor and the notebook. Fujitsu... -
Page 83: The External Monitor Is Blank Or The Image Is Unstable
► Charge the battery. ► Insert a charged battery. ► Connect the mains adapter to the notebook. The power adapter is not connected correctly. ► Check whether the mains adapter is connected correctly to the notebook. ► Switch the notebook on. Fujitsu... -
Page 84: The Notebook Stops Working
The wireless component is enabled. Despite ► Check whether the radio connection is this, the wireless connection to a network does switched on via the software. not work. ► Further information on using the radio component can be found in the help files. Fujitsu... -
Page 85: Acoustic Warnings
Supervisor PIN. SmartCard lost Cause Troubleshooting SmartCard lost ► If you are working in a network, contact your system administrator, who can boot up your notebook with a Supervisor SmartCard. Fujitsu... -
Page 86: Error Messages On The Screen
Press <F1> to resume, <F2> to SETUP operating system. This error message appears if an error occurs ► Press the function key to access the during the self-test before starting the operating system. BIOS Setup. Fujitsu... - Page 87 System battery is dead - Replace and run SETUP service centre. ► Contact your sales outlet or our customer System cache error - Cache disabled service centre. ► Contact your sales outlet or our customer System timer error service centre. Fujitsu...
-
Page 88: Technical Data
The data sheet for the device provides further technical data. You will find the data sheet on your device or on the Internet at "http://www.fujitsu.com/fts/support/". Rechargeable battery You can find information on the batteries used in your device on the Internet at "http://www.fujitsu.com/fts/support/". -
Page 89: Mains Adapter
100 V – 240 V (automatic) Rated frequency 50 Hz – 60 Hz (automatic) Secondary Rated voltage 19 V Max. rated current 3.42 A / 4.22 A / 4.74 A An additional mains adapter or power cable can be ordered at any time. Fujitsu... -
Page 90: Manufacturer's Notes
Declarationofconformity The "Declarations of Conformity" for the device can be found on the Internet at: "http://globalsp.ts.fujitsu.com/sites/certificates/default.aspx". Fujitsu Technology Solutions hereby declares that your device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. CE marking... -
Page 91: Radio Frequencies Used
100 mW WLAN 2410-2480 MHz 100 mW WLAN 5150-5350 MHz class 2 200 mW WLAN 5470-5725 MHz class 1 850 MHz, 900 MHz UMTS 1900 MHz, 1800 MHz 500 mW 2100 MHz, 2600 MHz 500 mW 850 MHz, 900 MHz Fujitsu... -
Page 92: Index
38 Fn+F2 26 CE marking 86 Fn+F3 26 Charging capacity, battery 32 Fn+F4 27 Cleaning 16 Fn+F6 27 Components Fn+F7 27 installing / removing 65 Fn+F8 27 Configuration, BIOS Setup Utility 73 Fn+F9 27 Connecting audio devices 64 Fujitsu... - Page 93 26 Safety 14 Low voltage directive 86 transport 15 Num Lock indicator 21, 25–26 Main memory Numeric keypad 23 see Adding memory 66 see Separate numeric keypad 26 Mains adapter see Virtual numeric keypad 25 connecting 18 Fujitsu...
- Page 94 27 decrease 27 Touchpad buttons 27 increase 27 TPM 57 Scroll Lock Transport indicator 21 Transport damage 17 Security functions 53 Transportation 15–16 SystemLock 58 Travel, notebook 15 Security functions, Troubleshooting 76 SmartCard 58 Trusted Platform Module 57 Fujitsu...
- Page 95 Volume control 43 User password changing 55 entering 55 Webcam 31 removing 56 Weight Saver Using the Kensington Lock Cable 54 Removing 35 Windows key 24 Wireless LAN: VGA connection socket 60 safety notes 14 Virtual numeric keypad 25 Volume Fujitsu...