Fujitsu 565Tx User Manual page 137

Problem
T r o u b l e s h o o t i n g
Possible Cause
5. Power switch is already in the On position.
6. The Main battery is missing, there is no
optional second battery installed and
there is no power adapter (AC or auto/
airline) installed.
L i f e B o o k ™ 5 0 0 S e r i e s f r o m F u j i t s u
Possible Solution
5. Try the Suspend/Resume button. If that
doesn't work,slide your power switch firmly
to the front,pause 10 seconds or more and
then firmly to the rear. If you shut down your
notebook from Windows 95 you are really
®
in a pseudo-off state, there is some power
on and you can restart with the Suspend/
Resume button. (See Save-to-Disk Mode
on page 44–45.)
6. When the battery is dead there will be a
beep when the power switch is turned on
and the notebook will immediately go into
Dead Battery Suspend mode. (See pages 28–
29.) Use the Status Indicator panel to verify
the presence and condition of the batteries.
(See Figure 2-3 on page 19.) Install a battery
in the main Battery bay in the front of your
notebook. (See Main Lithium ion Battery
on pages 99–101.) If it is not charged use a
power adapter until it is charged.
™
13