Mediaconnect - Fujitsu 565Tx User Manual

S e c t i o n O n e
Notebook Connector
MIDI/Joystick
Port
S-Video
Serial Port
Jack
Infrared Port
External Floppy Disk Drive
NTSC/PAL Adapter Port
Jack
Figure 1-12 MediaConnect Ports

MEDIACONNECT

S-Video Jack
This jack allows you to connect,and use directly,
any S-Video device, such as a VCR or TV. (The
S-Video standard provides for a higher quality
picture than NTSC or PAL.) (Figure 1-12.)
10
Power Indicator NTSC/PAL Jack
LED
This connector allows you to connect,and
use directly, any TV which meets the American
TV standard (NTSC) or the European TV
standard (PAL). (Figure 1-12.)
C A U T I O N
Notebook NTSC and S-Video TV outputs only
Connector
operate in 640 x 480 resolution mode.
PAL TV outputs only operate in 800 x 600
resolution mode. TV modes are disabled
until the resolution is set properly. Access
to resolution settings is via the Windows
95 Control Panel, Display, then Settings.
If different resolutions are set for the
built-in display and an external monitor
the resolution for both will be set to that
of the built-in display whenever your
notebook is restarted.
Infrared Port
The fast IrDA 1.1-compatible communication
port allows you to communicate with another
IrDA compatible device without a cable.
(See pages 46–47 for more information.)
(Figure 1-12.)
External Floppy Disk Drive Port
A con n ector for attaching an ex ternal floppy
disk drive ad a pter. The ad a pter all ows you to use
your modular floppy disk drive wh en the Mu l ti -
f u n cti on bay is being used for another purpo s e .
(Figure 1-12.)
Serial Port
®
The serial port allows you to connect serial
RS-232C devices, such as serial printers or
serial scanners. (Figure 1-12.)
MIDI/Joystick Port (MPU-401)
The MIDI/joys ti ck port all ows you to con n ect
and use MIDI and game devi ces to your note-
boo k . See your MIDI or game doc u m en t a ti on
for inform a ti on on their install a ti on and use.
(Figure 1-12.)