Fujitsu 565Tx User Manual page 72

S e c t i o n T h r e e
Table 3-2 Fields, Options and Defaults for the Primary Master or Secondary Master Submenu
Menu Field Options
Type:(No other Auto, None,CD-ROM,
parameters a re dis- User.
p l ayed wh en = Non e . )
Cylinders: (Available A number
to change only when between 0 and 65,535.
Type = User. May be
displayed for Type =
Auto when hard drive
has been detected.)
Head: (Available to A number between
change only when 1 and 16.
Type = User. May be
displayed for Type =
Auto when hard drive
has been detected.)
Sectors: (Available A number.
to change only when between 0 and 63.
Type =User. May be
displayed for Type =
Auto when hard drive
has been detected.)
60
Default Description
Auto All ows you to con fig u re the interf ace for almost any drive .
Ad d i ti onal fields are displayed on ly if t h ey can be ch a n ged by
the uti l i ty.
0 Sets the number of cylinders for the drive. This field can be
changed by incrementing (pressing the Spacebar) or by typing
in the number.
1 Sets the number of sectors on the drive. This field can be changed
by incrementing (pressing the Spacebar) or by typing
in the number.
0 Sets the number of cylinders for the drive. This field
can be changed by incrementing (pressing the
Spacebar) or by typing in the number.