Table of Contents
Advertisement
SECTION 2
5. CD - ROM Drive
CD - ROMS
Be careful for the following points in the use of a CD to avoid failure.
Do not use a boll-point pen or a pencil on label surface (printed surface) to write letters. And do
not attach a label on it.
Do not touch or damage the data surface.
Do not vent or put a heavy object on a CD.
When a CD accrues dirt or water drop, wipe it with a dry soft cloth from the center to the outer
side (Do not use cleaner or other chemicals).
Be careful not to splash coffee and other liquid.
Do not store in a hot or cold place.
Do not store in a humid or dusty place.
Loading/Ejecting a CD - ROM
Here is the explanation on how to load/eject a CD ROM.
1
Push the EJECT button.
EJECT button
The tray springs out a little.
46
2
Pull out the tray (1) and set a CD on it (2).
1
Inset the CD with its label side to the topside
with holding the tray with your hand so that
you can hear snap sound from the protrusion
in the center of the tray.
2
Advertisement
Table of Contents
