Modem Setup And Commands; Restoring Your Pre-Installed Software - Fujitsu 565Tx User Manual

S e c t i o n F i v e
C A U T I O N
Removing or installing the hard drive
with the power on may damage the hard
drive, the notebook or shock you.

MODEM SETUP AND COMMANDS

The operating system and application software
that is factory installed detects the modem
characteristics and provides the necessary com-
mand strings to operate the modem. The inter-
nal modem operation is controlled by generic
AT commands from the operating system and
application software. The standard long form
result codes may, in some cases, be displayed on
your screen to keep you informed of the actions
of your modem. The operating system and
application software may suppress display of
the result codes. Examples of result codes are:
OK
NO CARRIER
NO DIALTONE
CONNECT 33600
(Connection complete at 33,600 bps.)
26
ERROR
FAX
RING (This means an incoming call.)
BUSY
NO ANSWER
When using the internal modem with applica-
tions which are not factory installed see the
application documentation.
RESTORING YOUR
PRE-INSTALLED SOFTWARE
FROM THE RECOVERY CD-ROM
To restore your pre-installed software from the
Recovery CD-ROM follow the instructions with
the CD-ROM.
Remember that you must set the B oot
Sequence in the Boot Options Submenu in
the BIOS Setup Utility to CD-ROM then A:
then C:for the CD-ROM to be read for the
operating system.
C A U T I O N
User data and user installed applications
can not be recovered from the CD-ROM.