Fujitsu 565Tx User Manual page 129

Problem
The CD-ROM Access indicator on the Status
Indicator panel blinks at regular intervals when
no CD is in the tray or the CD-ROM drive is
not installed.
Docking Problems
Notebook does not turn on when installed in
Mini-Docking Station.
T r o u b l e s h o o t i n g
Possible Cause
5. Setup utility is set to something other than
CD-ROM for the Secondary Master Controller.
6. Wrong drive designator was used for
CD-ROM in the application.
7. Windows CD auto insertion function
®
is disabled.
1. The Windows CD auto insertion function
®
is active and is checking to see if a CD is
ready to run.
1. Mini-Docking Station AC power is not
plugged in.
L i f e B o o k ™ 5 0 0 S e r i e s f r o m F u j i t s u
Possible Solution
5. Revise BIOS settings to set S econdary
Master correctly. (See Main menu and
Secondary Master submenu pages 56–64
for more information.)
6. Verify drive designator used by application
is the same as in use by the operating
system. When the operat-ing system is booted
from a CD-ROM drive designations are
automatically adjusted. (See Boot Options
submenu on pages 63–64.)
7. Start the CD from the desktop or applica-
tion software or re-enable the Windows CD
auto insertion function. (See CD-ROM
Acces Indicator on page 21 for
more information.)
1. This is normal.
You can disable this function if you wish.
(See CD-ROM Access Indicator on page 21
for more information. )
1. Provide AC power to the Mini-Docking the
Station.
™
5