Fujitsu 565Tx User Manual page 133

Problem
Memory Problems
Your power on screen or Main menu of the BIOS
setup utility information does not show the
correct amount of installed memory.
Modem Problems
Messages about modem operation.
Pa ra ll el , Seri a l , and USB Devi ce Probl em s
You have installed a parallel-p ort device, a
serial-port device or a USB device. Your note-
book does not recognize the device, or the device
does not seem to work properly.
T r o u b l e s h o o t i n g
Possible Cause
1. Your memory upgrade moduleis not
properly installed.
2. You have a memory failure.
1. Me s s a ges abo ut modem opera ti on are
gen era ted by wh i ch ever modem app l i c a ti on
is in use.
1. The device is not properly installed.
2. The device may have been installed with
an application running and your notebook
doesn't know it is there.
3. Your software may not have the correct
software driver active.
L i f e B o o k ™ 5 0 0 S e r i e s f r o m F u j i t s u
Possible Solution
1. Remove and re-install your memory
upgrade module. (See Memory Upgrade
Module on pages 106–107.)
2. Make sure display of error messages is
enabled (see Boot Options Submenu on pages
63–64), and check for Power On Self Test
(POST) messages. (See on pages 134–136 for
possible messages and their meanings.)
1 . See your app l i c a ti on sof t w a re doc u m en t a ti on
for ad d i ti onal inform a ti on .
1. Remove and re-install the device.
(See Parallel Port Devices on page 101,
Serial Port Devi ces on pa ge 104, or USB
Devi ces on pa ge 102.)
2. Close your application and restart
your notebook.
3. See your software documentation and
activate the correct driver.
™
9