Fujitsu 565Tx User Manual page 76

S e c t i o n T h r e e
Table 3-3 Fields, Options and Defaults for the Boot Options Submenu
Menu Field Options
Boot Sequence A: then C:;
CD-ROM then A:
then C:;
C: only
Summary screen Disabled; Enabled
SETUP prompt Disabled; Enabled
Floppy check —
64
Default Description
A: then C: Read drive C only if no operating system is found on dr ive A.
Read drive C only if no operating system is found on dr ive A
and drive A only if no operating system is found on the CD-ROM
drive.
Read drive C only, even if no operating system is found.
Enabled Enables and disables the display of a screen containing a summary
of the configuration of the system. When enabled this screen
appears after the completion of Power On Self Test (POST) and
before the operating system is loaded.
Enabled Enables and disables the screen prompt Press <F2> to
enter SETUP . The F2 key will still start the setup utility if this
field is set to Disabled b ut no screen prompt will be displayed.
— Enables or disables the system from checking what kind of
floppy disk drive is installed every time it boots up. Disabling this
makes the boot a little bit faster.