Table of Contents
Advertisement
COMMAND AUTHORIZATION METHOD CONFIGURATION HELP
The command authorization section allows you to limit the CLI commands available to a user.
The table has one row for each client type and a number of columns, which are:
Client
The management client for which the configuration below applies.
Method
Method can be set to one of the following values:
•
No: Command authorization is disabled. User is granted access to CLI commands according to
his privilege level.
•
Tacacs: Use remote TACACS+ server(s) for command authorization. If all remote servers are
offline, the user is granted access to CLI commands according to his privilege level.
Cmd Lvl
Authorize all commands with a privilege level higher than or equal to this level.
Valid values are in the range 0 to 15.
Cfg Cmd
Also authorize configuration commands.
ACCOUNTING METHOD CONFIGURATION HELP
The accounting section allows you to configure command and exec (login) accounting.
The table has one row for each client type and a number of columns, which are:
Client
The management client for which the configuration below applies.
Method
Method can be set to one of the following values:
•
No: Accounting is disabled.
•
Tacacs: Use remote TACACS+ server(s) for accounting.
Cmd Lvl
Enable accounting of all commands with a privilege level higher than or equal to this level.
Valid values are in the range 0 to 15. Leave the field empty to disable command accounting.
Exec
Enable exec (login) accounting.
Buttons
PAGE 66
OPTICAL SYSTEMS DESIGN
OSD2524 OPERATOR MANUAL
DOC ID: 10120001
Advertisement
Table of Contents
