Trap Configuration
SNMPv3 Configuration
Configure SNMP trap on this page.
GLOBAL SETTINGS
Configure SNMP trap on this page.
Mode
Indicates the trap mode operation. Possible modes are:
Enabled: Enable SNMP trap mode operation.
Disabled: Disable SNMP trap mode operation.
TRAP DESTINATION CONFIGURATIONS
Configure trap destinations on this page.
Name
Indicates the trap Configuration's name. Indicates the trap destination's name.
Enable
Indicates the trap destination mode operation. Possible modes are:
Enabled: Enable SNMP trap mode operation.
Disabled: Disable SNMP trap mode operation.
Version
Indicates the SNMP trap supported version. Possible versions are:
SNMPv1: Set SNMP trap supported version 1.
SNMPv2c: Set SNMP trap supported version 2c.
SNMPv3: Set SNMP trap supported version 3.
Destination Address
PAGE 75
OPTICAL SYSTEMS DESIGN
→
→
Security
Switch
OSD2524 OPERATOR MANUAL
→
→
SNMP
Trap
DOC ID: 10120001