Table of Contents
Advertisement
→
Configuration
Security
Entries in the Dynamic ARP Inspection Table are shown on this page. The Dynamic ARP
Inspection Table contains up to 256 entries, and is sorted first by port, then by VLAN ID, then
by MAC address, and then by IP address. All dynamic entries are learning from DHCP
Snooping.
NAVIGATING THE ARP INSPECTION TABLE
Each page shows up to 99 entries from the Dynamic ARP Inspection table, default being 20,
selected through the "entries per page" input field. When first visited, the web page will show
the first 20 entries from the beginning of the Dynamic ARP Inspection Table.
The "Start from port address", "VLAN", "MAC address" and "IP address" input fields allow the
user to select the starting point in the Dynamic ARP Inspection Table. Clicking the
button will update the displayed table starting from that or the closest next Dynamic ARP
Inspection Table match. In addition, the two input fields will - upon a
assume the value of the first displayed entry, allowing for continuous refresh with the same
start address.
The
will use the last entry of the currently displayed table as a basis for the next lookup.
When the end is reached the text "No more entries" is shown in the displayed table. Use the
button to start over.
ARP INSPECTION TABLE COLUMNS
Port
Switch Port Number for which the entries are displayed.
VLAN ID
VLAN-ID in which the ARP traffic is permitted.
MAC Address
User MAC address of the entry.
IP Address
PAGE 114
OPTICAL SYSTEMS DESIGN
→
→
Network
ARP Inspection
OSD2524 OPERATOR MANUAL
→
Dynamic Table
button click -
DOC ID: 10120001
Advertisement
Table of Contents
