Ethernet Ring Protection Switching - Optical Systems Design OSD2524 User Manual

There is an active alarm on the MEP.
Buttons
: Click to add a new MEP entry.
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.
: Refreshes the displayed table starting from the input fields.

ETHERNET RING PROTECTION SWITCHING

→
Configuration ERPS
The ERPS instances are configured here.
Delete
This box is used to mark an ERPS for deletion in next Save operation.
ERPS ID
The ID of the created Protection group, It must be an integer value between 1 and 64. The maximum
number of ERPS Protection Groups that can be created are 64. Click on the ID of an Protection group to
enter the configuration page.
PAGE 180
OPTICAL SYSTEMS DESIGN
OSD2524 OPERATOR MANUAL
DOC ID: 10120001