OPTICAL SYSTEMS DESIGN
SYSTEM LOG INFORMATION
→
→
Monitor
System
Log
The switch system log information is provided here.
NAVIGATING THE SYSTEM LOG INFORMATION TABLE
Each page shows up to 999 table entries, selected through the "entries per page" input field.
When first visited, the web page will show the beginning entries of this table.
The "Level" input field is used to filter the display system log entries.
The "Clear Level" input field is used to specify which system log entries will be cleared.
To clear specific system log entries, select the clear level first then click the
button.
The "Start from ID" input field allow the user to change the starting point in this table. Clicking
the
button will update the displayed table starting from that or the closest next entry
match.
In addition, these input fields will upon a
button click - assume the value of the first
displayed entry, allowing for continuous refresh with the same start input field.
The
will use the last entry of the currently displayed table as a basis for the next lookup.
When the end is reached the text "No more entries" is shown in the displayed table. Use the
button to start over.
DOC ID: 10120001
PAGE 263
OSD2524 OPERATOR MANUAL