Table of Contents
Advertisement
1. Connect the Console Port on UUT to PC with USB cable (Type A to Type B).
2. Using HyperTerminal to set up the following parameters.
•
Baud Rate: 57600
•
Data Bits: 8
•
Parity: None
•
Stop Bits: 1
Flow Control: None
•
3. Check the link by pressing <ENTER>. The line should jump to the next line.
9.2
CLI COMMANDS FOR IP CONFIGURATION
PAGE 11
OPTICAL SYSTEMS DESIGN
OSD2258 QUICK START GUIDE
DOC ID: 10117602
Advertisement
Table of Contents
