Power Supply Connections - Optical Systems Design OSD2524 User Manual

3.2

Power Supply Connections

Dual Redundant DC Power Version
Connect the dual redundant power to the 4-way terminal block located on the rear of the unit.
The OSD2524 DC version requires external +10 to +36V
External Power Pin
AC Power Version
Connect AC power to the IEC connector located on the rear of the unit.
The OSD2524 AC version requires external 90 to 264V
PAGE 11
OPTICAL SYSTEMS DESIGN
FIGURE 3: DC POWER CONNECTION
TABLE 1: DC POWER CONNECTION
Pin 1, Pin 3
Pin 2, Pin 4
FIGURE 4: AC POWER CONNECTION
OSD2524 OPERATOR MANUAL
@ 40VA Max power.
DC
Specification
0V (Ground Isolated)
+10 to +36V @ 40VA max
DC
@ 50VA Max power.
AC
DOC ID: 10120001