Fitting Sfp Connectors; Combo Ports - Optical Systems Design OSD2524 User Manual

3.4

Fitting SFP Connectors

Care should be taken when inserting/removing the SFP connectors from the SFP port as SFP modules are
Electrostatic (ES) sensitive and Electrostatic Discharge (ESD) precautions should be taken when installing. Ensure
that the SFP is fully engaged and latched into position.
Inserting SFP – Ensure that the SFP lever is in the locked position and insert into appropriate SFP port. Gently
push the SFP until it locks into place. Remove plastic/rubber dust cap and fit appropriate fiber cable.
Removing SFP – Remove fiber connector. Pull the SFP lever down to unlock SFP from housing. Using the lever,
gently pull the SFP out.
Fiber SFP
3.5

COMBO PORTS

Note that ports 21, 22, 23, and 24 are Combo Ports and either the RJ45 ports or SFP ports will operate at one time,
with the SFP having priority. Each port is labelled accordingly and the combo ports are marked by the white
outline.
PAGE 13
OPTICAL SYSTEMS DESIGN
Inserting
SFP
FIGURE 5: FITTING/REMOVING SFP CONNECTORS
FIGURE 6: COMBO PORT ALLOCATION
OSD2524 OPERATOR MANUAL
2
1
Removing
SFP
DOC ID: 10120001