Connecting To A Telephone Line; Initial Printer Setup; Configuring Google Cloud Print - Xerox AltaLink B80 Series User Manual

Connecting to a Telephone Line

WARNING:
To reduce the risk of fire, use only No. 26 American Wire Gauge (AWG) or larger
telecommunication line cord.
1. Ensure that the printer is powered off.
2. Connect a standard RJ11 cable, No. 26 American Wire Gauge (AWG) or larger, to the Line port on
the back of the printer.
3. Connect the other end of the RJ11 cable to an operating telephone line.
4. Power on the printer.
5. Enable and configure the Fax functions.

Initial Printer Setup

Before installing the printer software, verify that the printer is set up correctly. Setup includes enabling
the optional features and assigning an IP address for the Ethernet network connection. The installation
wizard starts automatically the first time the printer is started. The installation wizard prompts the
System Administrator to configure the following settings:

Language

Network Connection

Proxy Server Setup

Date and Time

Measurements

LDAP Settings

Apps Setup

Security Settings
For more information on configuring the printer settings, refer to the System Administrator Guide at
www.xerox.com/office/ALB80XXdocs

Configuring Google Cloud Print

Google Cloud Print allows you to print documents that are stored in the cloud without using a print
driver.
Before you begin:

Set up a Google email account.

Configure the printer to use IPv4.

Configure Proxy Server settings as needed.
.
B80XX Series Multifunction Printer
User Guide
Getting Started
49