Paper Jams; Locating Paper Jams - Xerox AltaLink B80 Series User Manual

Hide thumbs Also See for AltaLink B80 Series:
Table of Contents

Advertisement

Troubleshooting

Paper Jams

This section includes:

Locating Paper Jams ..................................................................................................................................................... 216

Minimizing Paper Jams ................................................................................................................................................ 217
Clearing Paper Jams...................................................................................................................................................... 218
Troubleshooting Paper Jams ..................................................................................................................................... 220
Clearing Finisher Jams ................................................................................................................................................. 222
Locating Paper Jams
WARNING:
Never touch a caution-labeled area in the fuser. You can get burned. If a sheet of paper
is wrapped around the inside of the fuser, do not try to remove it immediately. Power off the printer
immediately and wait 40 minutes for the fuser to cool. Try to remove the jam after the printer has
cooled. If the error persists, contact your Xerox representative.
CAUTION:
Do not attempt to clear any paper jams using tools or instruments. This can permanently
damage the printer.
The following illustration shows where paper jams can occur along the paper path:
1.
Tray 5
2.
Fuser Area - Left Side Door
3.
Single-Pass Duplex Automatic Document Feeder
4.
Finisher Areas
5.
Paper Trays 1--- - 4
216
User Guide
B80XX Series Multifunction Printer

Advertisement

Table of Contents
loading

Table of Contents