Table of Contents
Advertisement
14.
Tighten the two set screws of the hard disk box,
as shown in the figure.
15.
Insert the hard disk box back to the mobile NVR,
and then tighten the screws clockwise.
1.8 SIM Card Installation
Pluggable wireless network module is designed for the mobile NVR and you should install the SIM card to realize the 3G
function.
Perform the following steps to install the SIM card on the mobile NVR
Steps
1.
Put
on
the
antistatic
installation.
2.
Use the screwdriver to loosen and remove the set
screw on the rear panel.
Mobile Network Video Recorder User Manual
gloves
before
the
21
Advertisement
Table of Contents
