Calling Presets - HIKVISION DS-M5504HNI Series User Manual

4. Select a Preset No., and click Set to link the location to the preset.
5. Repeat the steps 2 and 3 to save more presets.
6.
You can click the Clear button to clear the location information of the preset, or click the Clear All button to clear the
location information of all the presets.

3.3.2 Calling Presets

Purpose:
This feature enables the camera to point to a specified position such as a window when an event takes place.
Steps:
1. Right-click a PTZ camera and click PTZ on the popup right-click menu to enter the PTZ Control interface.
2. Click Preset button to pop up preset setting interface.
3. Select a Preset No., and click Call to link the location to the preset.
Mobile Network Video Recorder User Manual
Figure 3. 4 PTZ Panel
39