Table of Contents
Advertisement
DIRECTION Buttons
12
13
14
15
RESERVED
16
17
PTZ Control Buttons
18
Remote Control Troubleshooting:
Make sure you have installed batteries properly in the remote control. And you have to aim the remote control at the IR
receiver in the front panel.
If there is no response after you press any button on the remote, follow the procedure below to troubleshoot.
Steps:
1.
Go to Menu > Other Settings > Display > Advance Setting by operating the mouse.
2.
Check and remember device ID#. The default ID# is 255. This ID# is valid for all the IR remote controls.
3.
Press the DEV key on the remote control.
4.
Enter the device ID# in step 2.
5.
Press the ENTER button on the remote.
If there is still no response from the remote, please check the following:
1.
Batteries are installed correctly and the polarities of the batteries are not reversed.
2.
Batteries are fresh and not out of charge.
3.
IR receiver is not obstructed.
If the remote still can't function properly, please change a remote and try again, or contact the device provider.
1.4 USB Mouse Operations
A regular 3-button (Left/Right/Scroll-wheel) USB mouse can also be used with this device. To use a USB mouse:
1.
Plug USB mouse into one of the USB interfaces on the front panel of the device.
2.
The mouse should automatically be detected. If in a rare case that the mouse is not detected, the possible reason may be
that the two devices are not compatible, please refer to the recommended device list from your provider.
Mobile Network Video Recorder User Manual
Up, Down, Left, Right
1. The DIRECTION buttons are used to navigate between different fields
and items in menus.
2. In the playback interface, they are used for fast forward, slow forward,
rewind.
3. In Live View mode, these buttons can be used to switch channel(s).
1. The ENTER button is used to confirm selection in any of the menu
modes.
ENTER
2. It can also be used to tick checkbox.
3. In Playback mode, it can be used to play or pause the video.
4. In Auto-switch mode, it can be used to stop /start auto switch.
PTZ
Reserved
Back to the previous menu.
ESC
Reserved for future use.
In video search interface, it can be used to select all record files.
F1
Buttons to adjust the iris, focus and zoom of a PTZ camera.
F2
Reserved
Table 1. 4 Description of USB Mouse Operations
13
Advertisement
Table of Contents
