Table of Contents
Advertisement
5.
Select the date format and time format according to the actual needs, and then select the OSD property.
6.
Click the OSD Position button and use the F2 key and Direction keys on remote control to adjust the OSD position.
7.
Click the Set button of More Setting, and you can configure the video parameters, mask area, motion detection, etc.
Image Settings
Perform the following steps to adjust the video parameters, including Brightness, Contrast, Saturation and Hue.
1)
Click the Set button of Image Settings to enter the Image Settings interface.
2)
Select the parameter item, press Enter key on the remote control, and use the Direction keys to adjust the
value of the selected item.
3)
You can click Default to restore the default video parameters.
4)
Click OK to save the new settings.
Mask
The privacy mask can be set to prevent some certain spots in the surveillance area from being viewed or recorded.
Perform the following steps to set a privacy mask:
1)
Check the checkbox of Mask to enable the privacy mask function.
2)
Click the Area Settings button to set the mask area on the live view interface.
3)
Press the Edit key on the remote control and a red block appears on the screen.
4)
Press the Direction keys on the remote control to adjust the position of the red block.
5)
Press the Enter key on the remote control to save the position of the red block.
6)
Press the Direction keys on the remote control to adjust the size of the block.
7)
Press the Enter key on the remote control to save the size of the block.
8)
You can press the A key on the remote control to clear all the mask areas.
For mouse operations, you can click-and-drag the mouse to draw the area on the live video, and clear the
area via the right-click menu.
Up to 4 mask areas can be configured for each channel.
Mobile Network Video Recorder User Manual
Figure 2. 16 More Setting
Figure 2. 17 Image Settings Interface
34
Advertisement
Table of Contents
