Table of Contents
Advertisement
2.
Press Refresh to refresh the latest information of the connected USB device.
3.
Click Upgrade to start upgrading and reboot the device to activate the new settings.
Upgrading by remote FTP server
Before you start:
Ensure the network connection of the PC (running FTP server) and the DVR is valid and correct. Run the FTP server on the
PC and copy the firmware into the corresponding directory of your PC.
Refer to the user manual of the FTP server to set the FTP server on your PC and put the firmware file into the
directory as required.
Steps:
1.
Enter the Upgrade interface and select FTP Upgrade as the upgrade type.
Menu>Maintenance>Upgrade
2.
Input the IP address of FTP server in the text field.
3.
Click Upgrade to start upgrading and reboot the device to activate the new settings.
Mobile Network Video Recorder User Manual
Figure 9. 2 Upgrade Interface
Figure 9. 3 Upgrade Interface
69
Advertisement
Table of Contents
