Chapter 2 Installation And Connections; Installation; Hard Disk Installation - HIKVISION DS-9600NI-M8 Series Quick Start Manual

Network Video Recorder Quick Start Guide

Chapter 2 Installation and Connections

2.1 Installation

During installation of the NVR:
 Use brackets for rack mounting.
 Ensure ample room for audio and video cables.
 When routing cables, ensure that the bend radius of the cables are no less than five times than
its diameter.
 Connect the alarm cable.
 Allow at least 2cm (≈0.75-inch) of space between racks mounted devices.
 Ensure the NVR is grounded.
 Environmental temperature should be within the range of -10° C to +55° C (+14° F to +131° F).
 Environmental humidity should be within the range of 10% to 90%.

2.2 Hard Disk Installation

Purpose:
The section introduces the HDD installation. The product figures in following steps are only for
reference.
Before you start:
Disconnect the power from the NVR before installing a hard disk drive (HDD). A factory
recommended HDD should be used for this installation.
Step 1 Fasten the hard disk mounting handle to the hard disk with screws.
Figure 2-1 Fasten Hard Disk
11