Chapter 2 Installation & Connection; Preparation For Installation - HIKVISION DS-3WF Series Quick Start Manual

Preparation for Installation

To avoid device damage or personal injury caused by improper usage of the device, please follow
the preparations below.
 Use the attached power adapter and PoE injector to power the device.
 The distance between the AP and the CPE should be less than the suggested distance to secure
transmission rate.
 At least 2 m distance should be kept between two adjacent devices.
 Install the device in the place where the maintenance personnel can operate easily.
 The devices should be installed face to face and the max. angle of deviation is 30°.
 Disconnect the power supply when you have the device serviced.
 The temperature of the cover area will be high when the device is working. In the circumstances,
only personnel with relevant professional knowledge, such as installation and maintenance
personnel, are allowed to operate the device.
AP Installation
The AP device can be magnetically mounted or mounted by using a wall mount bracket. It is
recommended to mount the device magnetically.
Attach the back magnet of the AP device to the steel surface of the machine room, to keep the
device installed horizontally. The following two diagrams are for your reference.
Chapter 2 Installation & Connection
Magnetic Mounting Manner 1
5