Chapter 9
9.1 Checking Status
The status of recording, 3G, platform, satellite positioning, G-Sensor, alarm and WiFi can be checked in the Status interface
(Menu>Status).
9.2 Management and Maintenance
9.2.1 Upgrading the System
Purpose:
The mobile NVR can be upgraded by local USB device or remote FTP server.
Upgrading by local USB flash disk
Before you start:
Connect the USB device, on which the upgrade firmware is stored, to the mobile NVR.
The upgrade firmware should be stored in the root directory of the USB device.
Steps:
1.
Enter the Upgrade interface and select USB Upgrade as the upgrade type.
Menu>Maintenance>Upgrade
Mobile Network Video Recorder User Manual
Device Maintenance
Figure 9. 1 Status Interface
68