Chapter 2 Installation And Connections; Installation; Hard Disk Installation; Ids-96000Nxi-I16/24(B) Series - HIKVISION iDS-96000NXI-I16/24(B) Series Quick Start Manual

Network Video Recorder Quick Start Guide

Chapter 2 Installation and Connections

2.1 Installation

During installation of the NVR:
 Use brackets for rack mounting.
 Ensure ample room for audio and video cables.
 When routing cables, ensure that the bend radius of the cables are no less than five times than
its diameter.
 Connect the alarm cable.
 Allow at least 2cm (≈0.75-inch) of space between racks mounted devices.
 Ensure the NVR is grounded.
 Environmental temperature should be within the range of -10° C to +55° C (+14° F to +131° F).
 Environmental humidity should be within the range of 10% to 90%.

2.2 Hard Disk Installation

2.2.1 iDS-96000NXI-I16/24(B) Series

Purpose:
We take the example of iDS-96000NXI-I16(B) to describe HDD installation
Before you start:
Disconnect the power from the NVR before installing a hard disk drive (HDD). A factory
recommended HDD should be used for this installation.
Step 1 Unlock the front panel with the panel key.
Figure 2-1 Unlock the Panel
27