HIKVISION DS-M5504HNI Series User Manual page 42

2. Select the camera from the drop-down list.
3. Configure the following settings:

Encoding Parameters
Main Stream (Normal): used for schedule recording;
Main Stream (Event): used for event recording;
Sub Stream: used for network transmission.
When Main Stream (Event) is selected as the encoding parameters, the settings of stream type, resolution,
bitrate type, video quality, frame rate and max. bitrate are the same with that of Main Stream (Normal) and
cannot be configured.

Stream Type
Video and Video & Audio are selectable.

Resolution
Select the resolution for the selected camera and stream type. 1080P (1920*1080), XVGA (1280*960), and
HD720P (1280*720) are selectable.

Bitrate Type
Variable and Constant are selectable.
The video quality is configurable when you select Variable to the bitrate type; and the video quality is set as
Medium by default and cannot be edited when you select Constant to the bitrate type.

Video Quality
If you select Variable to the bitrate type, you can set the video quality as Highest, Higher, Medium, Low, Lower
and Lowest.

Frame Rate
Frame rate refers to the frequency of the image frame after compression. With other parameters constant, reduce
the video frame rate, and you can lower the maximum bitrate to some extent.

Max. Bitrate(Kbps)
Select the fixed value provided by the system or customize the maximum bitrate as desired.
4. Click the Set button of Schedule to enter the record schedule interface.
1) Check the check box of Enable Schedule to enable the record schedule settings.
2) Select the day from the drop-down list for settings.
3) Check the checkbox of All Day to enable all-day recording, and then select the recording type from the
Mobile Network Video Recorder User Manual
Figure 4. 2 Record Settings
41