Table of Contents
Advertisement
2.
Select the Exception Type and set the alarm linkage actions, including audible warning and alarm output.
3.
Click Apply to save the new settings and click OK to exit.
8.2.6 Configuring Alarm Terminal
Steps:
1.
Enter the Alarm Terminal interface.
Menu>Other Settings>Alarm Terminal
2.
Check the checkbox of Enable Alarm Terminal to enable the alarm terminal settings.
3.
Edit the terminal name if needed.
4.
Select the alarm output and then select the alarm triggered recording channel(s).
5.
Click Apply to save the new settings and click OK to exit.
The alarm terminal function requires for the cooperation of status display terminal DS-1530HMI. For details, see the
user manual of DS-1530HMI.
8.3 Configuring Firewall Settings
Purpose:
The mobile DVR provides software-based firewall to protect the device against the threats from the public network. A white
list can be set, and only the trusted IP addresses on the white list can access the device via the network.
192.0.0.xxx are set as the default trusted IP addresses.
The IP address of the platform server to add the device is set as the trusted IP address.
Up to 16 IP addresses can be added on the white list.
Steps:
1.
Enter the Firewall Settings interface.
Menu > Other Settings > Firewall
Mobile Network Video Recorder User Manual
Figure 8. 13 Alarm Terminal
64
Advertisement
Table of Contents
