Table of Contents
Advertisement
Leak Detector
Info mode
16
Agilent CrossLab CS Electronic Leak Detector Operation Manual
Info mode
Info mode provides details on the leak detector and the
currently installed cartridge, including the filter expiration date.
In addition, Info mode controls settings such as the display
brightness level and turning the buzzer on and off.
To access Info mode:
1
Briefly press and release Power/Mode button until
Info mode is observed on the screen.
2
Once in Info mode, briefly press and release the
Enter/Clear/Toggle button to scroll through the
available pages.
Display brightness
Display brightness can be set to high or low.
To change the display brightness setting:
1
With Info mode displayed, briefly press and release the
Enter/Clear/Toggle button to cycle through available
screens until the Brightness screen is displayed.
2
Press and hold the Enter/Clear/Toggle button for
two seconds to toggle between High and Low options. The
screen brightness changes based on the selected option.
Advertisement
Table of Contents
