Agilent Technologies CrossLab CS Operation Manual page 27

Leak Detector
USB interface
NOTE
Agilent CrossLab CS Electronic Leak Detector Operation Manual
For details, please visit:
www.agilent.com/en/product/gas-purification-gas-managem
ent/gas-management/gas-leak-detector
driver and view the Connecting your leak detector to your PC
instrument sheet.
When using the data acquisition capability of the leak detector,
you should disable the auto-off feature. See
page 17.
When the leak detector is being powered via the USB port, the
battery icon on the screen is replaced by a USB connector icon.
When the leak detector is connected to PC software, the
buttons on the leak detector are disabled. This is indicated by
an icon to the left of USB icon on the screen.
to download the
Auto off on
27