Operating Modes; Warm Up Mode - Agilent Technologies CrossLab CS Operation Manual

Leak Detector

Operating Modes

Operating Modes
Figure 4. Example of warm up screen and scroll to operational modes.
Agilent CrossLab CS Electronic Leak Detector Operation Manual
With the leak detector switched on, briefly press the Power/Mode
button to scroll through different operational modes.
The available operational modes are as follows:

Warm Up mode

This is the default mode on power up. The leak detector warms
up for 50 seconds when turned on. The warm up process can
be skipped by briefly pressing and releasing the Power/Mode
button. However, to guarantee accuracy in Detection mode,
allow for the completion of the warm up process. After the
warm up is complete, the leak detector will switch to Detection
mode automatically and is ready for use.
13