Configuring Devices - Micromeritics SmartPrep 065 Operator's Manual

Table of Contents

Installation

Configuring Devices

The Setup software enables you to configure your control module (PC) so that it

detects attached SmartPreps. The control module cannot communicate with the

SmartPrep(s) until the Setup software has recorded your configuration(s).

The number of SmartPreps connected to the control module must always remain

accurately defined. Thus, if you add or remove a SmartPrep from your system,

perform the following steps to update your software configuration.

You must exit all applications associated with SmartPrep before running the

Setup program.

Insert the SmartPrep Setup diskette into a diskette drive.

Choose one of the following:

If...

You are using Windows

3.1 or later:

You are using Windows

95:

Enter the name of the drive designator, followed by setup. For example:

Select

When the setup program is loaded, the following dialog box is displayed.

1-12

Then...

Select File from the Windows Program Manager.

Select Run from the File menu.

Select Start from the Status bar.

Select Run from the Start menu.

a:setup

SmartPrep

Sep 98

Table of Contents

Do you have a question about the SmartPrep 065 and is the answer not in the manual?